ZCTL 3x Loupe Magnifying Viewfinder for Universal 3.0" Screen DSLR Camera, Mirrorless Camera, Camcorder, Monitor - Black

Simple to use and great for outdoor use was very useful in sunlight nice And. clear and fits screen well

This item is excellent and works well, however the magnifying feature reduces the clarity of the view finder and the corners are thin and I am concerned about the long term durability. Overall I am happy with the loupe

I hadn't realised how much I needed a viewfinder until I started using my camera outside in bright sun. This device covers the camera’s lcd screen, with an eyepiece allowing the screen to be visible, even in sunlight. A frame sticks onto the camera screen and the main cover clips securely onto the frame when needed. So far so good.However the sizing (Supposedly for 3” (72mm) Universal) is strange. My camera, a Sony a5100 is claimed to have a tilting 3” (72mm) screen, although the visible screen size is actually less, being 65mm wide by 37 mm deep. By comparison the inside of the LCD Viewfinder frame is 61mm wide by 46 mm deep. As a result, the settings down one edge of the camera’s lcd screen are hard to see, while there is a gap at the bottom of the frame which allows light in. (I have remedied this by sticking a strip of black plastic along the bottom of the frame). It would be useful if a diagram could be provided Showing the actual dimensions of this item, along with instructions as to how to measure the camera lcd screen so customers would have a better idea whether it would fit their particular camera. In a nutshell, it does work, but I would recommend double checking the sizes before you fit it.

does not focus to screen

I use it on my Nikon Coolpix camera which only has a screen and no viewfinder.

I rated this at two stars as there’s no diopter adjustment which means I can’t use it.

If you broke your EVF screen/ribbon/ribbon clamp and can't afford 300GBP for a new mainbaord well this is for you use a full face respirator or need more clearance well its perfect as well!So first the highlightsGood enough optics and alines well with A7 screens might even work for camcorders...Free micro hood (unless you use glue fix)Can be used folded in but best is folded out.There is internal reflections on the plastic but this can be solved with light sceal tape for a few extra penny's if you so care.Sadly it's a non-fixed or latching mounting for the rubber meaning it falls off with a tap or flick there is a strap incouded but just glue or use a small scew bolt and nut on the plastic/rubber if your going to be running around with this.Using a plastic clip tab locking plate system, you mount a base to your camera and clip in a holder for the rubber magnification peice and that's it you get a few inches of bulk and an extended viewfinder using your back screen(Also yes it will make you realise how depressingly low resolution a backscreen is if you use current gen EVFs)Installation notes: keep device powered on to see alignment as it's offset when rubber holder is mounted.Use the included strap or make modifications to secure rubber to plastic mount plate.

The frame comes apart , not in A good way.

Es muy buena compra se adapta muy bien a la pantalla de la cámara lo recomiendo

Je l'utilise avec mon Nikon D800.C'est bien, les dimensions correspondent tout juste pour l'écran.J'y vois bien dedans.Il y a un clips sur le cadre pour séparer le corps et avec son tour de coup, c'est bien pensé.Parfait.

Non mi pare stabile cade

Le produit est conforme à sa description.J'ai réalisé plusieurs heures de tournage avec.L'objet est super utile, je trouvais l'œilleton de base trop petit et pas assez lumineux ; de plus, en cas de forte luminosité, la visée via l'écran été presque impossible. Avec cette solution c'est parfait, l'image est nette aucun souci.Il s'adapte parfaitement à la taille de mon écran de 7.6 cm (d'un Panasonic FZ-1000 ).L'autocollant M3 colle correctement, mais ne tirez pas trop dessus il s'est déjà décollé une fois dans mon cas.En revanche, pour la partie caoutchouc avec la lentille, elle se barre tout le temps du support collé à l'écran. En effet un petit choc et hop elle saute. Il est donc indispensable de l'attacher avec la dragonne fournie par le fabricant.Lors de ma 1er sortie, je n'ai pas mis cette dragonne et j'avais perdu la partie caoutchouc au sol sans m'en rendre compte en remballant le matos. Coup de chance j'ai pu la retrouver.Je conseille donc ce produit.

Ya, ha comprado 3 unidades para utilizar con mis cámaras Pentax Q y Q7. Las cámaras sólo tienen una pantalla LCD de 3" que es imposible a ver con mucho sol. Hace años compró unas tapas "Pop up hood" de marca Delkin pero rompió todos durante las vacaciones. También, ahora con mis años, necesito gafas para leer que significa que tengo que pone las cámara bastante fuera para ver algo sin ayuda.Con este lupa soluciona esos dos problemas, visibilidad con sol y vista sin gafas. Adamas es bastante robusto con piezas más substanciales que tienen las tapas "Pop up" de Delkin. El pegamiento del marco para montar en el cuerpo de cámara aguanta bien.La pieza principal con la lente es un molde de goma y tiene tendencia a sale desde su propio marco de enganchar a la cámara. Sobre papel no suena bien pero en realidad facilitar que puedes montar y desmontar este pieza más rápido que con el propio engancho plástico. Incluido hay un cordón con un clip de seguridad para este molde a conectar a la collar roja y que es esencial para no perderla. El molde de goma puede colapsar a mitad de su tamaño que ayuda de transporte y que es un factor que prefiero en comparación con los otros diseños más rígidas. En conclusión soy muy feliz con ese producto en relación de precio/ calidad / funcionamiento.