HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White, Model Number: 3D ABS-1KG1.75-WHT

Very happy with the color and performance of this filament. I am new to 3D printing and this is first time I printed with ABS so I can offer no comparison to other filaments at this point - only actual performance vs expectations. Very good. No tangles. No bad spots. I used most of this spool to print an RC model ship 28" long and 6.5" wide, in multiple pieces. Each piece took about 10 to 14 hrs so it took about a week printing a piece or 2 each day. It rained 2 of those days but didn't seem real humid to me. Printer was Prusa MK2S kit built. The room temp was 61 degrees F, I had a thin foamboard box around my printer 24" square, no bottom. I used Prusa Control software to slice and changed no settings from the default for generic ABS - 255 degrees C hotend and 100 degrees for the heatbed. I used glue stick on the bare bed, no cleaning between prints but did add some glue each time - parts stuck extremely well. I thought this might be too hot a temp but it worked real well and the ABS is pretty solid - you can twist & bend it but it doesn't come apart at the layers. Pretty smooth finish at 150 microns, looks about the same as the PLA I used and was able to do some overhangs I thought not possible with such hot material. So on the second to last print, 4th day of printing, I could see a minor change in the surface appearance, not quite as smooth looking. Then the final print on friday looked like it had a rough finish. On close inspection I believe this to be the result of accumulated moisture absorbed by the ABS finally showing its effect. It was very minor and smoothed out easily enough. Very good results gluing/chemical welding the parts together with some of the scrap ABS (power went out on one piece and so it became scrap, I mean glue ingredient). So when my glue had finally gotten to the right consistency for me, it had been sitting for a couple of days and had enough ABS to Acetone ration so it was like melted ice cream. No clamps, just brush on each piece, hold for a few seconds, move on to the next piece, let dry completely overnight and it won't come apart but sands easily. Am going to buy some more of this brand ABS in other colors for other RC projects.

Before I dive into the negatives, it's worth pointing out the goods in the product and why I like it. ABS is hard to print with, Hatchbox ABS is usually pretty strong and very good for the price. If you are looking to build durable materials and are willing to do some filament testing and stress tests you can absolutely get this to print beautiful parts that hold up to abuse, but you have to test the material. Being ABS, this suffers the same level of warping and shrinking as any other ABS material in 3d printing. You need a solid heat bed that can get to 100°C to even consider printing this and cold spots in your heat bed or lack of warm air during a print can cause shrinking, recommend having an enclosure around your printer as well as a decent heat bed to even consider printing ABS. That aside, this specific color does appear to be a little more difficult to work with than the black, grey, and white ABS that I've had from the same company. Temperature tolerances are much lower on this specific color and so printing above 210°C has caused printing quality issues as well as burned filament. Occasionally I'll just have blobs or streaks of brown as if the filament had been sitting in the hot end too long but never had the same issue with the white filament. I did some serious dial-in testing with my prints (photos included to show progress) because out of the box I struggled to get any form of decent bridging or overhang. For some reason this material oozed like hell and was especially apparent when trying to bridge even small gaps. It's not consistent with flow rate and actually had worse blob issues with decreased flow rate. I have my finalized settings below, but after about 30-40 extreme bridging tests I was able to understand the tolerances of this material. Unfortunately I had some issues with first layer adhesion as well and I'm not sure if this is related to the color and dye used or not, but using a brim of 2mm has almost entirely eliminated all first layer issues. Settings I landed on are below, your mileage may vary so I recommend doing temperature and bridge tests if you have issues. Slicer: PrusaSlicer 2.3.0 Printer: Prusa Mini (DIY, not official) Enclosure: Yes First layer temperature: 235°C Every other layer temperature: 210°C Heatbed: 100°C (All Layers) Bridge fan speed: 75% Normal cooling fan: 25% (always on) Bridge print speed: 25mm/s Bridge flow rate: 0.75

This is great stuff, i'm sorry for the people who had difficulty with it; i;m not sure what they did. first of ABS is acrylonitrile butadiene styrene, which is a copolymer. That is to say that its a blending of three different types of materials, acrylonitrile a poisonous liquid that provides a vinyl backbone of the filament. butadiene a compressed liquid used to solidify rubbers, styrene a monomer derivative of benzene used in many commercial plastics. So ABS ( acrylonitrile butadiene styrene) is a mixture of materials as such every manufactures recipe is going to be different its going to have qualities. For this one specifically i find if i lay it out at the standards 230 c with 105 c heated bed works well. the biggest problem i've had with this stuff is getting to to stick to the bed and stay stuck to the bed. there is an easy solution though take a chunk of the filament dissolve it in acetone and make a slurry, i use my left over trimmings as i trim the end every time i switch out of the left over brim or left over supports. place that on the bed and let it heat up and bake on to the bed. instant stick wont pull off doesn't warp, at least in my experience. i haven't had any clogging yet i have my printer set to 100mm print speed but everyone s printer is different in what their heat block can handle. i personally really like this stuff is it top of the line filament? No but then again i'm not paying 60 bucks a kilo, and you don't need to pay 60/kg for good filament. this stuff is cheap cost with with good results in my experience, if you willing to slow down and check your setting; it works well. an i mean this is mid range stuff good prints at reasonable prices. its great for the average joe if your the professional, your lively hood depends on it or you don't have the time to slow down and check print settings, ect..... then yeah i might look for a different filament;for me if a starter abs is what i'm looking for ,and abs is harder than pla, i wouldn't shy away from this. i'm quite satisfied with my purchase and plan to do it again

I have an extensive history when it comes to printing glow ABS and all of the basic "Glow in the Dark" filaments are an off-white color - not pure white but more like white that's been watered down a bit. The Hatchbox Glow in the Dark is a CLEAR filament with a touch of haziness to it. Printing it ls like printing clear PETG where the final print isn't actually transparent but more akin to an ice cube. It prints well - no complaints there. Adhesion and uniformity were on point. The glow effect just wasn't what I'm used to out of a standard Glow in the Dark filament and with the Hatchbox name and pricing, I assumed it would be exceptional in that area.

HATCHBOX ABS 3D Printer Filament in Black is a game-changer for 3D printing enthusiasts. This filament boasts exceptional dimensional accuracy with a precision of +/- 0.03 mm, ensuring that your prints turn out with the utmost detail and precision. What sets this product apart is its consistency - every layer adheres seamlessly to the previous one, resulting in flawlessly smooth and professional-looking prints. I found the 1 kg spool to be generously sized, allowing for numerous projects without the need for constant replacements. Whether you're a seasoned 3D printing pro or just starting out, the 1.75 mm diameter of this filament ensures compatibility with a wide range of 3D printers. I've tried other filaments, but HATCHBOX ABS stands out for its reliability and consistent performance. The black color option adds a touch of sophistication to my prints, making them suitable for both functional prototypes and creative projects. Overall, this filament has exceeded my expectations, and I highly recommend it to anyone looking for high-quality 3D printing results.

I'm still fairly new to 3D printing. I started about 6 or so months ago. All of what I have done is PLA, up until this spool. And I can tell you; I may stop using PLA all together. I decided to try ABS for a helmet I'm making for a Star Wars themed costume (Imperial Guard), due to the simpler post-processing, and reported increased durability. The quality of the prints I am getting with ABS is phenomenal. I did fully enclose my machine, and set up a ventilation system, so that did take some extra work, but it has been totally worth it. There was a learning curve with getting it to stick properly to my bed plate, but once I got that all figured out, it has been extremely smooth sailing. I was also blown away by the increased strength. I had some failed prints initially (learning curve), so I was breaking them apart to make ABS glue, and was stunned at how strong the parts were, even at only a few layers thick. A few things to understand about ABS (which you likely already know): 1) Cooling - Don't. I removed my cooling fan completely, and have been getting great results 2) Heating - Do. 95C Heated bed, 245C hotend, fully enclosed = great results 3) Filtered Ventilation - The fumes on this are pretty bad for you. Do yourself a favor, and build a ventilation system that protects you. I've got a simple 120mm computer fan pushing through activated carbon sheets, next to a exchange fan which blows anything not captured outside. 4) Storage. I haven't experimented with just leaving my filament out, I do live in an extremely dry climate (around 6-16% humidity normally), but I also store it inside my enclosure with silica beads next to it. I understand this is pretty important for good prints with ABS. 5) RRR (Reduce, Reuse, Recycle) - This is a PERMANENT plastic, unlike PLA, which is biodegradable. Don't throw it away. Re-use the bits as glue (mix with Acetone), recycle what you can't, and only print what you know you will use. Being good to the environment is just a good thing to do, not a political movement. 6) Have fun! 3D printing is one of those things that is just an incredibly fun hobby... so enjoy!!

Been using Hatchbox ABS for a while now and it prints consistently once you get your settings dialed in. The tolerances are tight so you are not dealing with random clogs or bad spots throughout the spool. If you are printing ABS for the first time this is a great starting point, it is forgiving and the results come out clean.

Saw this ABS filament on sale and figured I’d give it a shot. First few prints I did little over a week ago warped something fierce! Only way I was able to get anything good at all was 250 extruder 110 bed with hairspray. Nice solid raft setup that works fantastic on any of my other ABS have no issues. Rest of my ABS filaments have right around 6.5% shrinkage, this stuff I haven’t had a successful print because of raft warping to be able to measure the shrinkage. Today I opened up my filament tote and swapped out roll of white ABS for this roll of black. OMG IT WAS AWFUL. Loading the extruder was a real pain and printing was very rough. Test start line came out great then when starting the raft printed few lines perfectly then started stutter and putter away. Every now and then it would put a line or 3 down but stopped the print due to filament feed failures. I ran thru some petg to test and that flowed no problem. Then I ran some tip cleaner thru and then removed the heat sink and fan to check the feed. Little bit of shavings in there so I just cleaned them up a little(printed 14Meters of other white ABS earlier in the day. And there is no chance of moisture. Every filament roll is in its own airtight bags with 1/4 pound Silica Gel Desiccant beads to keep them dry. And inside air tight tote I have a sock with 3 pounds I just keep in the tote I case any bags have a hole. This is by far the worst filament I have ever used!! Maybe problem could be not 100% solid because I can hear little air popping out the extruder. Not happy at all and will be returning!! Pictures you can see the LOVELY quality is printing up. 30% hex infill in pictures.