LoctiteClear Power Grab outdoor Mounting Tape 3/4 Inch by 60 Inch

Loctite makes a tons of great stuffs, including this one. Very strong adhesive power and i cannot even feel a play after sticking my handgun mount to the wall. Be sure to read the instruction and use alcohol swab to clean the surface before installation.One thing worth noting is that the tape after peeling off the protective film is pretty thin, if you want something for gap filling, this may be the product you are looking for.

Works great at posting signs outdoors on siding and other surfaces. Seriously tough to get off.

He suggested it for a recessed light in the kitchen where the flange kept wanting to separate from the ceiling. I was going to go with an epoxy but that would have been rather permanent. So far this is working.It doesn't have a *lot* of holding power. It has *some*. So use it in light to moderate duty applications. It's not going to hold like duct tape or epoxy.

I left a review mentioning this product for another purchase. As I mentioned before, if you need to stick and stay. This is what you want!!!

Received the tape, opened and applied to a plastic sign, then stuck sign to the side of a plastic box outside on the porch. After 5 minutes the sign fell off and the tape did not feel sticky. Temperature was 55 degrees outside. I used two strips approximately 15 inches each. The sign was a standard yard sign, approx. 18" x 24", weighs around a half pound or less. I bought gorilla double stick as the back up solution, I'll test it next.

This stuff is great. Easy to use and holds everything in place so well. I even used it to hold up in place 2x6x5 feet lumber while I needed 2 hands up a ladder to nail it in place.

It came loose after it got hot. I tried it to keep my spoiler on my 350 Z

Doesn't really stick as well as I had hoped. Not particularly impressed with the product

I bought this to reattach the metal protector strip on the side of my car door based on my dad's recommendation (he's a mechanic) as it had started to peel off and stick out. I washed the surface first with hot water and then wiped it down with rubbing alcohol and so far it's working well. The instructions say to use it at a minimum of 10°C and I actually used it at -1°C so that might be affecting its effectiveness. However, it's been several days and the strip has mostly remained attached (just a little lifting) so I think this works quite well for that purpose (better than any of the various glues we've tried). It is very strong tape and in my (and my dad's) opinion is a good option for mounting or attaching things that have proven difficult to attach.

It took a long time to arrive as it was sent from USA but nothing on the listing indicated this.It would not hold the item I wanted it to, which was a fog light to the inside of car bumper, there was just no adhesion.

Very strong, lasts for years. I had used this on aftermarket parts on my car and they stayed on for years.

works ok

Agreed. Junk. Far from a 'power grab' this is a money grab. Serves me right for not having read the reviews first. DOH! Not at all as advertised.