CNC Aluminum 2" Folding Gear Shifter Shift Lever for Honda XR50 CRF50 XR CRF 50cc 70cc 90cc 110cc 125cc Dirt Pit Bike (Red Gray)

Quality is OK. There was a lot of flash left in the splined hole from cutting the splines so it took a few minutes of digging it out with a pic before I could install it. One of the other reviewers said it's fits a bashan storm, sure it fits on the shaft but it definitely isn't long enough unless you are riding barefoot. Only about a half inch of the peg sticks out past the engine case. It will work for now but it's less than ideal on this bike unless you enjoy wedging foot under it or over it. Will probably drop it another spline to make room for my foot for downshifts.

This product is too long for the CRF50F. Original OEM 24701-GEL-306 is 100mm long (center to center), where as this part is 130mm long. Fine if you have a big kid with huge feet, but not so good if someone is riding this who is smaller. It's pretty well made though, just too long for my customer's kids.

Fitment: Took some adjustment with a vice and a hammer, in order to bend it outward to prevent contact with the case cover on upshift. Also, the screwhole is far enough out that the screw does not rest in the bevel on the shaft, so the shifter is held on by clamping friction alone. I didn't find that out until it almost fell off, and shifting with it half-on started marking the threads. So, I had to tighten this more than I normally do for a gearshift lever. Still functional.Length: Good length for me, about two inches longer than stock.Color: Colors are true to the pictures. The end piece is anodized aluminum, and the shaft is painted aluminum.

I ordered this one because it says the spline is 12mm. But its not even close. More like 9mm. In attempt to pry it open to see if i can manage to get it on my bike anyway it looks like its about to break in half. The is very cheap aluminum and even if this did fit, i doubt it would last long.

The product its self is great. Seems to be well made for the price. My problem it that it does not directly fit my Apollo 125cc, I made it work with some grinding. Definitely not a direct fit for Chinese bikes though, the shifter will not shift gears due to making contact with stator casing. You cant shift up or down unless you grind the shifter down in a few spots, and also place it slightly awkwardly. I do not recommend for any Chinese pit bikes.

Great looking piece and looks tone made with good quality. Unfortunately it does not stay on, screw is torqued all the way down and continues to fall off during riding. Maybe it’s a one of but decided to re install original.

There is nothing wrong with the shifter, it just doesn't fit the Honda Monkey 125. If you are looking for a Monkey shifter, you need one with the 90 degree bend in it so that it clears the engine.

End is floppy, looks like it's going to break off from a kid using it