Adjustable Roller Table Stand HTC HRT-10 Super Duty Conveyor Feed Stand With 5 Ball Bearing Rollers , White

I bought 2 of the roller stands. I had no issues with the assembly and they are both very stable. Make sure you insert the upper to lower assembly correctly otherwise it is not level at all. Just level it out with the feet and good to go.

HTC HRT-10 Adjustable 26-1/2-Inch to 43-Inch Tall 5 Roller 18-Inch by 15-Inch Roller TableI have previously purchased a mobile base from HTC and found it to be of good quality when compared to rival imports and decided I would go back to them for a pair of roller stands. I found the roller stands to be of the same high quality when they arrived from Amazon.The welds are excellent, the assembly hardware was top-notch and the finish is super quality. The stands are very substantial with four adjustable feet (an important feature if your floors are not perfectly level) that make refinement adjustments possible to the other tools being used in conjunction with the stands.I am very happy with this purchase and wished I had saved the money spent on previous light-weight and wobbly stands that are of lesser quality. The only down side to the HTC HRT-10 stands are that they are relatively higher priced than competitors. But I think that you are getting the quality that you are paying for and receiving a tool that will do its job well for a long time.

So far so good. Well made. The weakest link is the attachment of the height crank which is attached by a nut welded to the frame. Would have liked to see a weld on all the facets of the nut instead of only the top and bottom. The tapered post makes height adjustment very easy. The rollers are level and turn smoothly. All in all a sturdy unit. My previous stand by Shopfox was much flimsier and not as sturdy so I expect this one will last much longer as it is made much more solid.

It's heavy duty, easy to assemble. Using it as an infeed support for my table saw. Makes handling larger pieces of plywood safely.

I like the wedge mechanism. Allows you to slowly adjust it down to be level with your work piece. Under impressed by the sheet metal legs. A little on the flimsy side. Stand can flex and move. Not rock solid like I was hoping.

Roller supports, whether multiple rollers or a single roller, have the common problem of steering the lumber off at an angle unless the roller is exactly 90 degrees to the machine from which you a catching the board. This is not so much a problem with a planer, but if you are supporting a piece off a table saw, it can cause the board to pinch between the blade and fence and potentially kickback. Other than this common problem with rollers, this is a quality product and works well. I especially like the tapered support which allows minute height adjustment with the crank.

I have used (with some frustration) a single point roller (one roller, connected to the stand below) with limited success. The one roller configuration always seemed to get out of alignment, even after careful tightening of the securing bolt/nut. This roller stand is superb. It stays in alignment, and handles heavy loads as I send wood through my drum sander. Highly recommended.

The crossmember at the top of the wedge was not square, so there was a significant tilt from one side of the rollers to the other side--so much so that with the glides on one side adjusted all the way up and all the way down on the opposite side, it was barely level and not very stable due to the tilt of the stand. I ended up grinding off the existing weld, squaring the top of the wedge with the angle grinder and rewelding the crossmember back onto the squared wedge. With this modification, I am very pleased with the stand. Other than this construction issue, I like the quality of the stand.

Fair price, built well, works well. No chance of tipping over like the single roller units

Simply the best