Dilwe 12 LED RC Car Light, Lighting System Kit Simulation Flashing Lights for 1/10 1/8 RC Car/Truck/Crawler

I fitted this to a Tamiya 1/10 Bronco. It works really well, especially when compared to a more basic, but far more expensive unit like the TLU-01 from Tamiya. This worked perfectly and is essentially a 'plug n play unit. If I were being critical I thought the choice of blue for the rear lights was odd, I would have used red (I have- I simply swapped positions on the control board and now have red rear lights) ands the leads could be a bit longer. This apart, I am very impressed and would (Will!) buy again for my next build.

The media could not be loaded.

It works

Exactly what I wanted car look fantastic

About the best set on amazon

They seem OK iv not used them yet. Come pre wired but sadly no mounting clips so they need to be glued into place

This is the second Dilwe lighting system I have had to return in two weeks. If you are wanting this to add a little extra spice to that nice new scale model you have just built I wouldn't bother.1st of all this system turned up unlabeled, not a big deal just a bit of messing to work out which channel is which.2nd the dead zone (when both indicators/turn signals are off) for the indicators is way off so if you turn right and back to centre the right indicator stays flashing. You have to blip left to clear it, left works fine and its not due to trimming, same on a couple of radios.3rd why blue for reverse? yeah errm when am travelling backwards I want it to be a police car? anyway that's more of a gripe than a reason.I am now going to make up my own lighting system, hell you can get a box full of leds, some 100 ohm resistors and some wire for less than this kit, granted a bit of soldering is needed but least you'll have what you really want for that nice Tamiya ford escort mk2 :)

I thought this would be a clever bit of kit, but in the end I kept the LEDs and chucked the controller in the bin. The direction signals are way off and only worked in one direction. The blue LEDS are really a waste of time. In the end I just used the LEDs with the standard Tamiya controller which I had spare anyway.A BIG BEWARE here, the LED polarity needs to be reversed to work with the TAMIYA controller, fiddly but not difficult.As a package of LEDs with cables and connectors it was just about worth the money since TAMIYAs LEDs are a rip-off.

Gute helle LED's. Funktioniert einwandfrei.Durch umstecken auch Dauerbeleuchtung möglich. Ich bin sehr zufrieden.

Nickel, très bon produit

Bello preciso e semplice da montare

Buen kit de luces para coche radio control, muy fácil de instalar, intermitentes, luces de freno, delanteras y otras por ejemplo para cua do quieras encederlas desde un selector de canal de la emisora, se echa en falta las tuercas para colocar las luces en la carrocería. Tienen muy buena luminosidad.

Top 👍