VELUXOriginal Roof Window Blackout Blind for CK02, Grey, with Grey Guide Rail

This is as advertised and the price is much less than buying from Velux. Now installed the product does it's job, no light gets through, it all fits together well, moves smoothly and looks good. The thing to be careful about is the installation. We were told by various sources that it would be easy to fit. The instructions are purely pictures and not always easy to understand. Having the right tools is important. It would be useful to have two people doing the job. I fitted two identical blinds on my own. The first took about an hour and was OK apart from one screw hole I put into the wrong place. The second took about half an hour due to knowing the process. Getting into the right position to be able to do the different aspects of the work isn't straightforward. Fitting some of the pieces together is quite fiddly, some trial and error until it came right, needs at least two hands. We have another one to do which will require being up a ladder. I don't fancy that, don't think I would be safe, will be getting professional to do it. You have to be able to reach the top of he window to pull the blind down with your hand, if this is not possible you can buy a pole with a fitting to pull it down but I don't know how well they work.

Bought three to replace three with mine far too old and one just fell off in the night! Great service and just as they said. Thank you!

Great quality and it was really easy to install as it only took 10 minutes

Very easy to install. The item that arrived was about 6cm too long for my window (my own fault - GGL MK04 is not the same as GGL M04!!) but I managed to trim the side rails with a hacksaw and take up the slack in the cords. It fits well and there is no light bleeding in at all when it's closed, despite my slight hack job and is definitely a lot better than the third party blind I had in previously :)For anyone interested, there is a little metal bracket inside the end of each side rail that can be slid out and placed into a "trimmed" siderail; so cutting the siderails to fit a shorter window is actually quite straightforward. The most difficult bit was taking up the slack in the cords: on the clip that the cords are attached to, there are two indents on the "wrong" end of each clip; so you can loop the cord around the clip a few times and then lock it in place using those indents. Time will tell if this is a long-term solution, but the blind works fine and the cords stay in place nice and taught under the guiderails.

A little on the higher price side but they fitted perfectly and complete blackout for the window above our bed which was perfect.

For years we have been woke and blinded in the summer morning sun. But no more!These blinds were easy to order and simple to install.They are a perfect fit for the frame and gives a smooth slide to close and open, aswell as excellent blackout even in day time light.Should have bought these years ago!

I wasn't sure whether I'd go for the OEM blinds at pretty hefty additional cost, but I thought I'd play safe since this is very visible in the room...Upon opening the packaging it looks very good quality, with the runners matching exactly with the existing window and other blinds which were fitted on other windows.READ THROUGH INSTRUCTIONS BEFORE INSTALLING OR PULLING ANYTHIN APART!!!- real important or you could pull apart things which will make installation much much more difficult!!The instructions have no words but fairly easy to follow basically:-- Pushing in top blind section until it clicks on mounts which should already be present on the velux. (If they're not present, there's a bag with a ? on it which provides two substitute clips. I didn't realise this at first and was scratching my head what to do with these at the end!) I had to give it a bit of a gentle bang to get it to clip into place. DONT take off the red bits yet!- Using the provided buttom clips, screw those into place using provided torx screws and torx screwdriver. (Note not to use the clips I mentioned above which are bigger and use the 2-3 philips screws in a bag)- Take the side metal runners and slide them in each side. Before sure they're slide firmly into place at the top before you clip them at the bottom. Hint if you get it wrong, unscrew the torx screw on the bottom clips rather than trying to force the thing out of the clip and potentially breaking the clip.- Once in place, screw the torx screws into the holes along the runners on each side. The torx screw driver should be adequate to screw into the velux wood without need to drill holes.- Pull off the red circles to unroll the cords and then pull out the grey plastic cordends and pull them down to the bottom clips. You'll need to gently stretch them for a moment at you get them to clip into place.- Now at the top take off the red retaining clips at the top and you should be able to pull the blind down- done!Installation took me about 20-30 minutes with careful reading of the instructions. Once done I'm very happy with the results.At £73 vs around £40 for a non-OEM one it's a hefty difference in price. However seeing the quality of this product, and the finish the materials, it's a premium I'm happy to pay for.I'll see over time and update in due course as I use these...

Colour of blind is stunning. Had an issue with blinds, quickly rectified by company. Fitted well. Brilliant communication, well packaged, timely delivery as stated.Thank you.