Ball Wheel + Vacuum Head Connector Replacement Compatible with Dyson V10 V11 V15 100W High Torque Cleaner Head Accessories

Works good did have to drill out screw holes too small for screws.

Video was fairly detailed and extremely helpful. 2 - 3 steps were challenging and I was very concerned that I might break a piece while taking it apart. Screws that came with the wheels were the hardest to screw back together. Never did get them all the way in before the Phillips started to strip. Used pliers to get them as far as I did. Should have started with pliers and finished with screw driver. Should have been smaller diameter. Wheels wobble because the screws did not fully seat. Tools provided were a must.Bought SS #4x1/2 round head screws and they went in easy.Does not slide as smooth as my wife would like!

The holes were too small for the screws, I had to re-drill the holes myself, or rather make them larger for the screws. It took me about 2 hours to fix it.

These parts were really easy to install. Watched along with an online video to remove the old parts and install the new ones.

When I ordered this I didn’t realize how difficult it would be to install it. You literally need to take every single screw off of the brush head just to put this on. If you are not experienced with taking things apart and repairing items, stay far away from this. It’s challenging even though it looks like it should be easy.The part itself is just like the original, that may be an issue because this vacuum has a flaw where the screw on the ‘V’ rollers shears completely off, so I wouldn’t expect this one to last any longer than the one Dyson sells, but it is quality for the money you spend. The fitment is OEM and it functions just like the original piece…HOWEVER, and this is the most important part, the screws that come with it DO NOT FIT! You will need to cannabalize the screws from the old part in order to install this. I had to do this on both sides and I’m lucky I still had them, otherwise all this work would be for naught. It’s incredibly frustrating that they would sell something like this and then the only fasteners they include don’t fit. So beware or order them elsewhere along with this otherwise you’ll be stuck when it comes to attaching the rollers.Other than that, it does the job, has all the tools but is still missing some pieces. And based on the labor and the price of the parts it’s almost not worth replacing. Almost.

Husband replaced our broken one with these, it worked perfectly. Shall see how long they last.

If you're a tinker, organized (a lot of screws), and patient, you'll be fine. I imagine a novice would get easily frustrated and perhaps break something.. I fixed my wife's Dyson in about an hour. The wheel screws it came with were too long, I used my own. I piloted all the screw holes slightly prior for an easier fastening. For me, the hardest part was removing the little electrical plug prong clip. It's held in by a pinch snap and doesn't just slide out. There's no real access to release it, however, I used my own long thin torq driver to reach inside from the bottom and push the snaps up. Once they're free, it will pull out just fine. It's not a piece of cake, but it wasn't difficult either. I would easily do it again. It did the job so I would recommend it.

This kit fixed my broken dyson battery vacuum with some time I had the new part installed and I also watched a few videos to get the idea how to take apart and fix it.