Sealey Headlight Restoration Kit - HRK01

As someone that's never had to polish a headlight I was actually quite impressed with the end result and how easy it was to do.The car only just scraped the MOT recently due to clouding so I bit the bullet having been reluctant to start sanding away at expensive headlight units.All in it took about 20 minutes per light but on a warmer day I'd probably stretch that to 30 minutes and get an even better result.

Great restoration kit. Easy and very effective. Does as it says.

This set is ok, does the job to a certain standard. Kit comes with everything you need just depends on how bad your lights are.

It is correct when it says kit for two headlights. The headlight covers for my BMW are for two headlights each I therefore had to buy two kits. Still was the same cost of one kit from the main competitor. (I had used once before, I found the renewed surface quite quickly deteriorates).The Sealy instructions suggest using a drill for the rubbing down, (tricky!). I did it by hand and got good results for reasonable effort. The results appear disappointing until application of the final fluid. Then crystal clear. Certainly recommended MOT passed)

Product was easy enough to use, worked as described and gave impressive results.Just be aware that the UV clear coat needs to be applied away from any sunlight, them requires several hours in bright sunlight to cure. Can take a bit of planning logistics/weather wise. This caught me out the first time, and meant I had to sand it off and reapply because it didn't cure properly (entirely my fault).Other thoughts:- don't panic too much after the first sanding - it will look like the headlight is ruined, but have faith in the process.- I reckon 5-10 min with each grade of paper is sufficient, but YMMV.-the clearcoat sets quickly once open, don't spend too long applying it!-the clearcoat gives off some pretty nasty fumes as it cures...apply in a well ventilated area and try to avoid breathing them.

Saw this and thought, my van lights need doing so bought it, did it today as per the instructions, took just over an hour and absolutely amazed at the result. Comes with uv protection to put on at the end so should last a while. Worth every penny.

I didn't use all the kit as I was brought similar items by a friend, we used 3000 grit to finish (this pack goes to 1500/2000 so not great) then we used our own polish pad and cream. I did use the UV liquid and sponge. It's terrible, ok it's not a hot day but was wet to touch many hours later with flies stuck to it. Lens ruined. The wipe cloths from 3M are better.

This is a greta product. I have re-polished two sets of headlights and this product is by far the best. I saw it recommended on YouTube (Salvage Rebuilds UK) and the know their stuff.You need to follow the process properly - right to the end. The lens will look worse after the first and second stage - but the third is astonishing!There's a 'how to' guide on YouTube and the instructions are actually very good - I suggest read them twice and follow them. Also, the third stage needs two hours in direct sunlight so don't start too late in the day.