VonHaus Table Saw 8" (210mm) 5000 RPM 15000W - Circular Mitre Function – High Spec with Attachable Table Sides – Make Longitudinal & Angle Cuts with Carbide-Tipped Saw Blade

ordered on the 7 march 2020 came two day later, well packed, instruction's easy to follow took me about an hour, tried a few cut's with no problem's, it's a bit noisy but work's well, only 1 problem so far is blade guard wont stay in position tend's to drop down. but on the whole it's a DIY saw and well worth the asking price.

I was doing some work in the house that needed a table saw but unlikely to use it again so bought on a budget. Had some doubts given some reviews but actually very pleased with it. The table was level, the stick-on label/markings accurate and sawdust extraction, when connected to a hoover, worked surprisingly well.I did have one issue in that when lowering the blade it went out of alignment but knowing that can happen it is easy to quickly check before each cut.Very robust and useful for a low budget but for the keen hobbyist, for large work or someone with a workshop/space I would recommend something bigger.

Table saw arrived on time , but I didn’t get a chance to put it together right away. Put it together in less than an hour . Easy to set . Have only used it once since setting it up , but could find no faults with it . Cuts accurately and without trouble. Will be using on a project at the weekend. So far I like it good machine.

i ghad one of these before from a different maker. it kept cutting out, and ther cut was not very good. this one is perfect. i can get a perfect straight cut. nice price too

first thing I would say those of you think this is a good quality product , wouldn't know a quality product if it slap you in the face. who ever designed this table saw , has never used a table saw in there life. the stick on tape measurers are a disgrace , so don't rely on them . the dust extraction system is laughable, you have a pipe that's gets in you way when you cut its and extract from the saw blade guard it should extract from underneath the table , is this meant to be a joke. you get 48 nuts and bolts to assemble the saw with, for a piece of machinery that vibrates , haven't the manufacture heard of lock washers or nylock nuts, the two poor quality spanners that come with this saw, my advice throw them in the bin and purchase two new spanners of good quality . sue the measuring scales on this saw as an approximation , buy your self a good set of squares ,a good steel rule and a good protractor if you want to make accurate cuts , one more piece of advice make test cut first on waste material first

The info to build wasn’t easy to read but got there in the end.Quality of cut is to a good standard I have been trimming plinths which cut really nice with a clean edge and no splitting on the paint work.Side for extra width work are not as strong as they could be.Overall for the money really impressed with the buy.

Ill start with the positives:• the motor is pretty descent, hasnt cut out on me yet.• blade that comes with it leaves an OK finish (i have no other table saws to compare to though)• once its set up correctly (which is tedious) you will get a nice strait and square cut.• the cable is pretty long.• comes with an ok push stick• blade guard is nice, has flaps to each side that move up and down easily enough when you pass your work through the blade.• its very light and easy to move (also a negative)Negatives:• its extremely loud• it wasnt very easy to assemble• it flexes easily under weight• its very light and too easy to move when cutting heavy stuff• the mitre gauge doesnt fit the track so its loose and therefor not accurate.• The fence is very flimsy.• The rulers at top and bottom of the table and the blade tilting angle guide are all stickers that have not accurately been stuck on.• The legs are flimsy and twist easily• The wings for the table and their supports are like the legs, flimsy.• the table top isnt flat,• the thing you lift off to access the blade is super thin flimsy plastic and not level with the table• the riving knife doesnt come out easily• i have had the nut that holds the blade on come loose and the blade fall onto the screw, making the blade spin off centre and eventually catch on the housing and stop spinning. That was a bit scary.• rather large cut offs of wood can fall down the side of the blade, and the blade is enclosed so makes it very difficult to remove these chunks that fall in. If the chunks are rubbing against the blade, well, u get a burning smell lol.• The off switch is very small and could do with one of those flaps for you to push with your knee to turn it off.• Finally, for the price, i can overlook most of these things but not this one.... The wheel that makes the blade go up and down is also used to angle the blade by pushing it in to grab the teeth in the plastic housing. Works great until you move the blade up and down again and the blade goes out of square, EVERY TIME, without failure, the blade WILL go out of square once you move the blade up or down.

Got it for somebody else. The safety Gard is a bit cheap could be better. But okay 👍