iNextStation12V LED Light Strip IP65 Waterproof Green LED Strip Lights 16.4ft/5m Cuttable 300 SMD 2835 LED Tape Flexible Led Lights for Bedroom Outdoor Indoor Decor (Power Adapter not Included)

I liked everything about it, would have given it 5 stars, but the sticky back was dried up and didn't stick well to the fiberglass cap on my camper, which I cleaned very well prior to installing.

Easy project. Looks good

Easy to install an extremely bright

I have ordered several of these. Shipping is always quick and item arrives time. Have used these for various applications including lighted poles. Automotive applications and various accent lighting around the house. Always work as expected. Very flexible strip and easy to work with.

All the lights work, but I have a couple issues with this light strip that may not apply to everyone.1. The lights are spaced too far apart in my opinion. This is a matter of personal preference and what your project requires, but the image makes these seem more dense than they are in person.2. They are a pain to connect cut pieces. I cut and soldered wires to the light strip and it was incredibly tedious. I had to carefully use a knife to remove the rubber to expose the copper terminals, then I soldered some 22 gauge wire to it and it was an absolute pain. I can't blame the product too much, because I'm sure not everyone will need to do this and I'm not the best at soldering, but I've seen light strips that have a much easier connection system.3. The adhesive is pretty weak, so I had to glue/tape the ends to keep it from peeling off.Other than that, they are very bright, true to color, and they all worked perfectly.

Other then the adhesive not being very effective they work just fine and they are very bright

added these lights under the new awning that I installed on the 5th wheel toy hauler. The blue matches perfectly with all the blue lights we have through out our campsites. Installation was very easy wiped the area down with alcohol rag and let dry. Wiring connected to the existing 12v wire from the old white LED's that were sewn into the old awning. Used a 12v connector on the rv wire to make a clean sealed connection

I wiped the smooth aluminum surface off with solvent that was meant for removing any wax or oil before applying strips of this tape. I also clamped the product in place and let it set overnight. The adhesive failed within 2 days of removing the clamps.

Loose connection causes strip to flicker or not work. Adhesive also is very poor, portions that did stick released within a week.