4 Pack Hall-Effect Joysticks Replacement for DualSense PS5 Controller, 3D Analog Sensor Wheel Thumb Sticks Joystick Rocker Module Replacement for PlayStation 5 Controller

Just finished replacing all 4 joysticks on both of my controllers and right out of the gate, they work great. I highly suggest plugging your controller into your laptop and calibrating it at https://dualshock-tools.github.io to ensure you have it centered properly (very easy process).If you dont have a soldering workstation, you will need to make sure you get the essentials before attempting this replacement. It takes a moderate amount of dexterity and know-how when it comes to removing the old joysticks, desoldering, and soldering in the new components. I wish I had a desoldering gun for removing the old joysticks because using a focused heat tool and desoldering wick was a biznatch.At minimum get yourself a desoldering gun, a soldering iron, solder, and flux before you get started. Doesn't hurt to have some 90% or higher alcohol available to clean the circuit board if needed.Great product thus far, hope it holds up and myvcontroller drift stays a thing of the past.

Used these to replace the joysticks on my PS5 controller. I have only used 2 of them so far but I am keeping the other 2 for when my other controller starts to drift. They are not easy to replace but that is Sony's fault. These fit the control board perfectly and work great so far. I have not checked the calibration or anything but I don't have any issues playing any of the games I play. There is an equal amount of dead zone in all directions as far as I can tell and no more drift or ghost inputs. The kit is nice and helped. I didn't use the joystick caps, I like the ones that the controller had originally and these feel a little harder and more like plastic, but it's nice to have extras in case I ever need them.

These worked well but I lost functionality of r3 on both of the controllers I replaced these with. I had to make a custom modification to resort the re button which more than doubled the workload.

Work as expected for a PS5 controller that was previously experiencing drift. 3 of the 4 would have been fine with no calibration, but one was drifting slightly in game play. Went online and calibrated them on DualShock/tools.github.io. A few other reviews had mentioned issues with their R3. In my case, no issues with my L3 or R3, they still work fine.Removing the existing hardware is a pain, in part due to the number of pins involved and the fact lead free solder requires a higher temperature. After spending too much time trying to desolder ~14 pins and remove as a whole assembly, I ended up breaking it down into smaller parts. For example, disconnected a pot and removed just those 3 pins. Much easier doing it in small steps. Once I got the hang of that trick, the second (left) one took half as much time as the first (right).A nice small flush snippers, desolder braid, and flux are the accessories you need - in addition to a soldering iron and solder. If you don’t know what those are, then this project probably isn’t the one for you.

Joystick was weirdly sticky despite cleaning with isopropyl. It would physically stick to outputting 1.0 on the Y axis, -1.0 on the left axis, as if being held in place by a glue or sticky residue.

So, I just installed these today and I gotta say - they do work. But immediately after the sticks were all wonky. My let one was pointed a few degrees up, and my right on a few degrees right. I checked these using some common online controller GUIs. There is a solution however, as there is also an online tool that will recenter your controllers for you. With that recalibration they have so far been perfect - but if they fall out you can rest assured that I'll be coming back to lower my score further. Absolute nonsense that I should have had to jump through such hoops after installing these things (which it is already a bit of a pain to desolder the old joysticks)

The kit is perfect!All of these were darn near spot on for center calibration right out of the box.Installed all four in my controllers.They feel very nice.Very pleased!

Llegó todo lo especificado y se nota de buena calidad.