4pcs Hall-Effect Joysticks Replacement for DualSense PS5 Controller, 3D Analog Sensor Wheel Thumb Sticks Rocker Module Replacement for PlayStation 5 Controller

These are great. I don't have skills or equipment to install them so had a local game shop do it for two PS5 controllers. It's been about 2 months and have zero issues on controllers that used to have stick drift issues! If you know how to solder and can calibrate the controllers, what can go wrong at this price point? Highly recommend!

They work great.Note: you need calibration after the installation and for this you need aldo it on a computer.

Have two dualsense controllers with jitter on the right sticks. I had heard hall effects would correct the problem but didnt want to waste the high cost at the moment. And after having the same issue with ps4 controllers years back, I knew the level of work it would take to change these. I bought the tiny film with potentiometers first to try out. Those where a lot cheaper and it was a lot easier to just put a little solder on top of the original stick contacts. Tried those on my dead ps4 controllers and as I thought, it didnt do much. With those tiny film potentiometers you adjust on one end but the other side of the travel gets messed up. Those where more luck than a guaranteed solution. After a year finally saw this hall effect ones on a reasonable price and decided to buy them. Be advised this is a complicated replacement to do. The toughest part is removing the original ones from the controller. Controller can be opened with a quick internet video. But desoldering the old one takes A LOT of patience. If your up for the challenge it'll fix your dead ps5 controller for sure. Just take your time a dont rush. Once you get the original one off its easy putting the new one in and just taping the solder points. To calibrate them after, just go on the internet and look for a video. Its easy and again, PATIENCE is the key on removing the old one AND calibrating the new one. From a 50 dead zone setting on apex were down to a 0. Oh and I only replaced the bad one. The other joystick on the controller was fine. If it also goes bad along the way I'll just do the same.

No le doy 5 estrellas porque en el momento después de configurar y calibrar las palancas u el movimiento da un poco de drift.

Fantastic sticks and really need to be brought back in modern factory controllers. But companys wouldn't sell many new controllers.Bought them to replace 3 sticks in 3 different ps5 controllers, from different friends and family, plaged with stick drift.Make sure you have solder wick, a soldering air gun, and some flux to make life a breeze removing the old stick.Sturdy, responsive, and with a good install bound to last the life of the console.

Product installed fine and has good signal / range of motion. However, the return to center spring force is weaker than factory sticks. I normally use the Elecgear kit, but since I didn't need the desolder plate or wick I figured I'd try a different brand and see if I can get just a good set of sticks for less. While this set is serviceable it doesn't have that crisp return to center feeling, I will keep looking for a good "value" set of sticks.

The media could not be loaded. Exact fit for PS5 dual sense controller, joystick replacement, fix. However, the controller will notice the difference from this and the original joystick module, as the controller will not respond to the reset button as usual but will operate normally, though the reset led feedback may not respond as usual.

1 of the 2 failed within a month causing intermittent drift. Had to remove and resolder all 14 pins with a different brand joystick, which has been working great.