FXC 3/4" Round LED Clearance Indicator Lights Side Front Rear Marker Lights Bullet Running Turn Tail Lights 12V for Pickup Trailer Truck Car Bus RV ATV UTV (20Pcs White)

Good quality product plug and play easy to use

These are excellent- you get twenty in a bag, enough to easily fit one large or even a few small projects, and the ease of installation and low power draw versus brightness these give is really impressive. After drilling a hole you fit the rubber tube in, then slide the LED into that, and it squishes tight for a fantastic seal. The wires that come off the back of the light end are sealed inside of the plastic body itself, completely waterproof. Checking this with a meter to test I saw it drawing barely 0.44 watts from my 12-volt battery, which is incredibly low for how bright it is. The beam does have some lines in it from the shape of the bulb casing, and does not go too far before scattering, but it is visible at a long distance, and projects enough light to easily illuminate the interior of a small shed or an outdoor parking space clearly with just one light. The bulb also stays quite cool even after hours of use, probably due to how little power it draws, which gives me the impression it will last a very long time before burning out. For how many you get, the great waterproofing, low power use and surprising brightness I couldn't have been any happier with these, they are excellent in every way and completely worth a full 5-stars, absolutely.

When it comes to trailer marker lights, reliability and durability are paramount. That's why I turn to these small yet mighty DOT-approved marker lights.Their compact size is a standout feature, allowing for easy installation in tight spaces without sacrificing visibility or compliance with regulations. Tucking them away securely ensures they're less prone to breakage, safeguarding your investment for the long haul.What sets these lights apart is their LED technology, offering unparalleled longevity. With LEDs, you can trust that your lights will last for years without the need for frequent replacements, saving you time and money in the long run.For added peace of mind, I recommend soldering the wires for a secure connection that withstands the rigors of the road. This simple step can extend the lifespan of your lights, ensuring reliable performance trip after trip.Highly recommend!

Very bright. Easy to install. Quality is good.

Even being smoked lenses the lights are bright and work great

NOT SAFE – NOT DOT FMVSS-108 COMPLIANT – RETURNEDNO DOT SAE RATING OF ANY KINDNOT SUITABLE FOR ANY TYPE OF HIGHWAY VEHICLE LIGHTS NOT FOR CLEARANCE LIGHTS, NOT FOR SIDE, NOT FOR FRONT, NOT FOR REAR, NOT FOR MARKER LIGHTS, NOT FOR RUNNING LIGHTS, NOT FOR REAR MARKER LIGHTS, NOT FOR RUNNING LIGHTS, NOT FOR TURN LIGHTS, NOT FOR TAIL LIGHTS. This is a warning about the proper application details that you need to know so that you will not have any problems with the Highway Patrolman and or your vehicle insurance being valid if you DIY these lights. You MUST NOT install these lights on a vehicle that will be used in the USA on the highway. These LED lights DO NOT have the proper SAE or DOT certification. Such certifications must be provided on the fixture itself for the Highway Patrol Inspector to see. The faces of these lights DO NOT have the SAE or DOT certified labels. If you get in a traffic accident that IS NOT your fault but you are using these NON-compliant lights you will lose in court. All the suing victim's lawyer has to tell the jury is that your trailer lighting WAS NOT in DOT SAE Compliance and the jury will blame you for the accident. If these LED Lights were safe and high quality, then certainly the manufacturer would have submitted this product to one of the independent electrical safety testing laboratories for electrical safety testing, SAE and DOT certification, and labeling. I wonder why the manufacturer did not have this product certified. I am NOT going to use this product. You should not use this product. Why would you use it when you can buy proven safe and DOT SAE compliant certified products from all over Amazon? You need to know all these terms before you install trailer lights on a vehicle that will be used on the public roads in America: DOT; SAE; FMVSS and DOT FMVSS-108 requirement. DOT is the Department of Transportation. DOT is the federal agency that sets standards for vehicle lighting. BY LAW, all headlights and tail lights must be DOT approved to be legal for use on all roads and highways in all 50 states of United States. Head or tail lights without DOT approval are intended for off road use only, and are not legal for use on all US roads and highways. So all DOT approved headlights and tail lights will stamp the word “DOT” on the lights to show law officers that they are street legal and complied with the transportation law. SAE is Society of Automotive Engineers. SAE is a world wide organization that sets automotive standards for the manufacturing, testing and design of car lighting. To be SAE approved, all headlights and tail lights must past certain standards, test procedures and material test; set by SAE to guide the quality of the product. FMVSS is Federal Motor Vehicle Safety Standards that specify Federal Lighting Equipment LOCATION Requirements. An SAE specification is useless standing alone without also having the DOT approval specification. SAE is the design and DOT is the approval. These LED tail lights DO NOT have a DOT SAE specification rating meaning that they MUST NOT BE USED on a highway use vehicle. So you need to do your own research. In my state I can call the Highway Patrol and my friendly Highway Patrolman will come out to inspect my DIY homemade trailer to be sure it meets highway use lighting requirements and give me free advice before I use it on the highway. It is much better to have the friendly Highway Patrolman visit you at home rather than on the highway because you negligently made a dangerous trailer lighting mistake that caused a motor vehicle accident. My Liability Insurance Agent, and my lawyer, both call these types of just-waiting-for-a-lawsuit type products: “Litigiously Incorrect”. In vernacular these types of products are a great product for earning money for the suing liability lawyer, a terrible product for the hurt victim and negligent user.

The media could not be loaded.  I like this compact light fixture. It has the brightness of a 194 incadescent bulb. It looks to be a 5000k color. It fits into a 3/4”hole, but seems a little loose. It snaps in but not super tight. I can remove the light with one hand, so not very secure for an outdoor trailer light. If you can reach the back, a dab of clear silicone will completely rectify this problem. 3/5 stars.

This review is for a pack of Round LED Clearance Indicator Lights. This pack includes 20 lights. You could get different colors, I did purchase white. We just bought a new RV so I’ll be anxious to use these. It’s going to be simple to just hook up to a battery and connect in route them.