WOWLED RGB LED Strip Lights Magnetic PC for Mid Tower Case Decoration Remote Control Powered by 4-Pin Molex Cable 30cm 5050 SMD Pack of 2 Strips DC 12V

Our PC didn't have RGB headers on the motherboard so I chose this product as it can be installed and then powered by a spare molex connector from your PSU. It was really easy to install and so far (5 weeks) the magnetic strips have held firm and have not moved inside the PC even though they are upside down. You can control the colours of the strips from the supplied remote control. One thing that was a bit weird is that the colour selectors of the remote control worked perfectly at 1st, clicked blue, you got blue on the LED strip, clicked red you got red etc. But after about a hours use the colour selectors seemed to get scrambled somehow (no idea how) and then red was purple, green was red etc etc. Not really a problem once we worked out which colour you needed to select on the remote to get the colour you wanted on the LED strip.

Works well. Magnetic backing on LED strip is conveniently used to attach to inside of case. Also has adhesive backing if your case is not metal.These come with extension cables so you can place your LED strips anywhere inside the case and have enough slack to space them out.

They are absolutely the easiest thing to get Set up in the world, the controller with the sensor is abit big and really sad it doesn’t have pre applied adhesive or Velcro or something, the lights are really nice and aesthetic - could be much brighter though. Overall really good pick up for the price! Will definitely get more for my next build.

Superbright with beautiful colours and modes. Easy to use and the magnets and adhesive made this easy to fit, my wires aren’t the best quality but hidden in my psu shroud they’re fine, if you don’t intend on disassembling this product than it is perfect.

This lighting set is really easy to install. Just plugs into a spare molex plug from the PSU. I recently did a heap of upgrades on my not so new PC including CPU, memory and graphics card as I use it for video and photo editing. Trouble is I got into trying a few games and then making my PC look great but understated. At 60 I should know better but I like tinkering. I have a large section of see through grille on the side of my case and the blue CPU LED fans on my large heatsink show through well so I got this kit to add additional colour lighting. I attached them using the self adhesive backing to the inside of the side cover facing inward. As the two light strips come with cables which unplug easily I can unplug the strips if needing to get the cover out of the way to replace anything or tinker. I cable tied the receiver for the remote to the PSU harness which can just be seen through the holes in my case cover. It picks up the remote from a good distance enabling operation of the light strip. If rebooting it always keeps the last setting which is great if you settle on something you like. Very happy with this set. For the price it is superb value and looks superb.

Works like a charm,only thing is that when in my pc case it is hard to switch colours when trying to use the controller through tempered glass.

Handy to have to give a new, fresh look to an old motherboard inside of a gaming PC a few years old.Lights can adhere to the inside of a case using either magnetism or the supplied adhesive, i opted for the magnets and they haven't fallen off yet.The lights remember what colour they were last set to, meaning that if you're like me, and you just want one colour and thats it, you can set the colour and keep the remote in a drawer somewhere else for a rainy day.delivery was prompt and packaging was adequate

Product itself works great, as advertised. Sticks to a steel case without needing any adhesion and nicely lights up the case interior. My only gripe with it is that the amount of modes you get with the little remote is lacking. For the price you can't complain too much.>Strobe effect is only in the white colour, and would be very welcome if you could change the strobe to any colour you want.>The "smooth" and "flash" effects are more or less entirely identical and both unsightly to look at with too much flashing. No reason for them to utilise two buttons on the remote and would recommend not using either as neither is good to look at, unless you really enjoy flashing carnival ride look.>"Fade" works well and skips through colours slowly so if you like a slow rainbow cycle, it will do great for you. >Remote seems to be good quality and changing brightness works just fine.>My second gripe with it is that it uses Molex as a power source. Molex is pretty outdated these days and SATA power choice would be much welcome feature for system builders.>Last but not least, the remote needs to be in clear line of sight with the sensor otherwise the remote will not work at all. For modern cases with entire glass panels it shouldn't be an issue, however me using it in an older steel case with small side window makes it much more difficult to change colours, so beware of this if you have a case similar to mine.Overall, the product itself works fine, just could use few more features for different light cycles and better power connection, especially if you use a modular power supply, as this means you need an extra cable just for molex while having a sata power would simply require plugging it into an existing sata cable inside your build.