Lower Hose for Tineco Floor ONE S3 / IFloor 3 Handheld Vacuum Cleaner， 1" Replacement Lower Duct Hose ，Vacuum Cleaner replacement parts for Tineco

The picture illustrates the break in the vacuum tube that this coiled tubing kit fixes. My picture shows a tygon tubing piece used as a surrogate for a replacement. Using the tubing restored all sucking power for my Pet Pro. Ok,dump the tygon trial and use the coiled tube. The trick to use this coiled tube replacement is to cut off the old cracked tubing on either end of the piece in Pet Pro. Leave a little bit to “guide” screwing in the new piece of plastic tubing. The kit comes with 2 tubes of adhesive, one for each end of the broken piece. Apply the adhesive to one end, and use it while still wet to gently introduce the new tubing into the old tubing still attached. Repeat for other end, noting orientation of two screws and one pin hole lock. The new tube is ever-so-little smaller and slides in nicely. 24 hours of glue drying and the Pet Pro (or any other Bissell product—they seem to use the same tubing in lots of products) is fixed. Extremely good flexibility. My Pet Pro was renewed with this part—-the part is not sold by Bissell and you cant get it fixed at any of their shops. The point is: about 2 hours work taking the Pet Pro apart, replacing the damaged part (this is the Achilles Heal of Bissell Pet Pro) and 30 minutes reassembly —-take pictures as you disassemble—- and the fix worked!!!! Saved $249.00.

I never thought that my tineco would need a hose replacement. I don’t even think they sell that part on the tineco website.The first thing I noticed was that the floor seemed wetter even after being vacuumed. I thought it was because I changed solution brand.Few weeks later, it got worse. At this point, it didn’t seem like it was sucking up any water. I had to stop using it. After some research, I came to realize the hose was broken.There weren’t much options for replacement and it was almost $20 here when I got it. There were no reviews or anything, but couldn’t live without my tineco. I sucked it up and bought it.It was easy install and came with everything you need. It’s been about 3ish months and still going strong.

Very good quality, fixed my tineco vacuum and it’s functioning again!

You don’t receive what you see so just be aware you only get the hose nothing else. There’s no sealer or screw driver as shown. $16 dollars for a little piece of hose it’s not worth it.

I was able to replace a broken hose in my Tinco 3 mop vacuum. Watched a video, ordered this, fixed the next day.

The Tineco is pretty reliable and solid but I feel better knowing I have replacement parts if needed. The hose feels sturdy and everything to install it is included. Im happy with it.