Motorcycle & Powersports Maintainence Stand Wheel Chock for Crusier, Sports, Dirt Bikes, Heavy Duty Motorcycle Stand for Trailer Adjustable, Detachable, Wheel Chock Tire size 13" to 26"

This paddock stand is quality and well worth the money,easy to put together and has width adjustment to suit most bikes,Used the L brackets on my BMW F750GS as there is no where to fit bobbins,with the width set,offer the stand up to the swing arm on the lower side stand side,start to take the weight,which is easily done with one hand at the same time push the bike upright,push down and that’s it,it is genuinely easy to do,lifts the rear wheel enough to spin it,and not too high to make the bike unstable,to take off,just lift the stand from the floor and keep hold of it as the wheel is lowered and just make sure the bike goes onto the side stand,best bet is to leave it down,so you don’t forget about putting it down,and that’s it,thoroughly recommend this stand,as it seems robust and well made,and should last the lifetime of your bike easily.

It's well built and looks capable to do the job but I've not used it yet

After altering an R and G single sided stand with rotacaster wheels for my ducati to fit in a tight space I thought I would look round for a ready made one to save quite a lot of work and time for my new Daytina 675r with bobbins. The Australian built Dynamoto stand is an excellent option but the price is just not justifiable here in the uk. I also looked at the new 360 degree one from Oxford products which was on the list as a possible well constructed option but came across the Grand Pitstop Option by chance and it looked well constructed and supplied by amazon so if it was rubbish i could send it back. It arrived today and I am super impressed by the build quality ease of putting it together and the finish. Less than half the price of some of the other less well built options I researched. I have to give it 5 stars because for the price point and build I think it deserves it - there are a few tweaks and options that would in my opinion make it a market leader -1. with the current castor set up it works fine on very flat even ground - I think a slight increase in castor size it would be more beneficial for those with rougher concrete floor garages could be an option when purchasing2. There is still slight twist in the uprights and although bolted together with a single m8 bolt each side and sturdy I think there could be a better way of really making this with no twist at all - I assume its bolted rather than one piece for packaging and shipping purposes - still loads better than my R and G elevation stand which has loads of twist due to plastic inserts3. a nice inexpensive touch on some other models is some rubber protectors on the hooks save damaging the paintwork whilst getting it on the stand - I've made my own from heavy duty shrink wrapIn summary for £75 quid a bargain for a sturdy stand and even if you had to buy slightly bigger castors and fit them it would still work out cheaper than some other offerings.

This is now my “Go To” when I lube my chain or clean my rear wheel. If you have ever struggled solo with a Paddock stand then this is a brilliant substitute.This is small enough to be carried on your motorcycle is extremely robust and well made.Can be used front or rear, wish I’d got it sooner.

The media could not be loaded. I was really intrigued with this product as I have a lowered GS, so no centre stand. It was a bit difficult to get the hang of (in terms of how far away it should be) but I got there in the end. Needed to use my muscles to get the bike up. Only issue I found is that it would slip and drop the wheel, so I propped a brick beside my side stand and everything was okay. I think all in all it was good money and was easy to use once I got the feeling for it. The bike was super sturdy too and I wasn't worried about it falling down. The quality was nice on the strap as well.

Anyone thinking of buying this. Do it!!!Best stand I’ve owned! Quite small and compact which is great and very very strong having two rear wheels rather than most that only have one.I have a Honda cbr1000rr and it holds it very sturdily. Best bit is being able to spin the bike on the spot as it’s a dolly stand so no more lifting the rear up to shift the bike into position in my studio.So in short, buy it!!!

Could be my bike is too light for this to work well but it either just pushes the bike to one side, doesn't raise it enough for the tue to clear the floor or is at an angle that's very hard to push locked. The rubber grip provided doesn't work well on tarmac or the bottom of the swing arm, so while it's undoubtedly well made, it just doesn't work.

Tried to use on indian, but due to it only have side stand ,not easy to manoeuvre. So lift bar works well to get bike up