iGreelyDual Positive/Negative ATC Style Fuse Holder 10AWG Wire with Ring Terminals and 45A Connectors for Automotive 1.2M 4Ft

Using this to connect solar cells and 20A solar charge controller to RV lead acid deep cycle batteries. Hoops fit on the batteries no problems. Other end has 45A Anderson connector. All appears to be heavy duty construction. Two built in fuse holders, one on positive and one on negative. Comes with 15A, 20A and 30A fuses.

Product installed in minutes. Attached a 2nd battery to a Yeti 400.

Perfect cable and it fits the Yeti 400. I had to slid / separate the connector, the connector that fits into the Yeti 400 and turn the connectors to align them to fit into the Yeti 400. See the pics from the ad, very helpful.Thanks,

I needed a power cable to go from the battery to my HF Ham radio and this fit the bill because it had Anderson Powerpole connectors. My only comment the ring connectors on the battery are almost too large to fit my Eco-Worthy battery. A couple of washers solved that problem.

Terminals and power pole connectors, plus three fuse sizes available for 45 Amp rated wiring.

Quality copper wire, terminals and fuse holders. but the Anderson Power Pole connectors were assembled improperly. The Red and Black Power Pole connectors should be connected side-by-side in the standard fashion (documented on Anderson Power Pole website and others). This item came with the connectors attached one on top of the other, thus will not mate properly with a standard pair of power pole connectors. It is relatively easy to rectify - you can detach the connectors from each other and re-attach in the proper orientation - but you kinda got to know what you're doing.

Was the perfect length for our connection from the Goal Zero Yeti 1500x to the Blue Sea 6 Circuit Breaker. Everything worked with very little effort and time. Quality wire, ring terminals and Anderson Powerpole connector.

Contrary to the advertising text, the connector can NOT be "freely assembled by hand" and are provided in the GZ configuration and not the standard configuration, as shown in the photos. The connectors are glued together, and while they can be broken apart - they will not fit back together with the glue residue in place. Be prepared to toss those glued housings and replace them with new ones in the standard configuration. Other than that, it appears to be a quality product with good crimps on 10ga wire.

As advertised

Parfait pour les explications 12v, aucun problème avec ce produit

These work perfect in my yeti400 battery pack