Sosation 6 Pcs Square Plastic Flat Blank Plate Wall Hole Cover Ceiling Cover Plate with 48 Pcs Double Faced Adhesive Tape for Ceilings or Wall(12 Inch)

I had to cover several 4" round holes in some walls after removing air vents. I didn't use the self-stick pads because the plates would stick out too far ... kind of useless to include those. The process: I just used adhesive caulk to attach it to the wall, used blue painters tape on each corner to it'd stay on while it set up overnight. In the morning I removed the tape, used painters caulk around the edges [blend in with finger] to help keep it on as well as help blend it in by eliminating most of the shadow of the edges.I attached 3 photos here ... the first 2 show the process, the 3rd is the plate on the wall after caulking around the edges before sanding, painting it. I then lightly sanded, wiped with damp cloth, used primer, then painted to blend in with the rest of the walls. You can hardly tell they are there unless you look close, or know they are there. I would send a photo after it's painted, but you can't see it; it would just look like a white wall. Thumbs up on these ... they saved me a lot of time!

I used this to cover a hole left b/c of a change in our shower hardware.I used fiberglass tub repair kit to 'glue' it in place and there is NO leak, barely anything to notice. Works GREAT

Thiner that I thought it would be

If you’re looking for a stiff wall hole covering, this is not the product. Rather, this product is somewhat flimsy and quite flexible. That’s the reason I gave it three stars. On the other hand, it’s very thin, and therefore it might blend in better than a thicker, stiffer product. However, the adhesive foam that comes with it is thicker than the wall covering. So it will cause the hole cover to stand out from the wall more than you might like.

we removed some of the ceiling light bulbs to cut the brightness & the receptacle was exposed like holes in the ceiling...these covers were the perfect solution...not only is the receptacle protected but the ceiling looks so much better without those open recessed holes exposed...

These disks are way too flimsy to cover holes in walls. Also the double sided tape is too thick and holds the disk too far away from the wall. Terrible design.

Good solid plate to cover an oversized hole in ceiling.

I purchased this to cover the wiring hole of a ceiling light and it worked far better than my first attempt with a metal plate. All I had to do was cut a slice from the middle and an "X" at the middle point. From there, I was able to cover the hole and wiring and the included 3M glue squares will probably outlast my ownership of the house.

No good, returning

I have a hole in a wall where a speaker used to be I was able to cover this hole up using this plate and it has blended in perfectly. Was very easy to install without any problem. Would recommend it to anyone wanting to cover up unsightly holes without having to resort to drywall.