656ft/200m OD-5mm Industrial TPU OM3 Fiber LC to LC Outdoor Armored Fiber Patch Cable, Duplex Multimode Fiber Optic Cable, 10Gb, 50/125, Uniboot LC-LC with Pulling Eye Kit Installed on one end

I run this cable inside a 3/4 plastic electric conduit for 100' underground, it was super easy to pull, connect my 2 Ubiquiti switch, and working like charm. I'm very happy with this product quality and price. Thanks a lot.

I used this to connect to Ubiquity switch with 10gb GBICs. The cable seems pretty well made and the protective pull strap they attached to the cable when produced worked perfectly. I was able to pull this pretty easily through the bridle rings already installed, a hole in a block wall and through a wooden structure without any problems, despite my helper getting a little over zealous at times and pulling hard when it got snagged a couple time on something along the way. the LC connectors are decent quality and the link came up immediately. Overall very happy with the cable and I will buy this again when needed.

While I did have to flip the polarity, the cable works as advertised. It is currently outside in the elements and is workign great to connect my shop to my switch located in the house.

The media could not be loaded. This was my first fiber run ever. It was also my first underground run through conduit. I did VASTLY underestimate the amount of friction that a few bends in the conduit add, however, we used some IDEAL cable lube and sent it down the pipe.Frirst try we made it about half way and our weak pull-string broke. Given we were REALLY pulling on this SOB, though a couple conduit bends. Make sure your pull string is TOUGH!Second attempt we cut the conduit before the last bend and pulled. Then the metal clip that fixes the fiber cable to the pull string BROKE. Yes, the METAL hook broke. Two men were pulling just as hard as they could, and the cable wouldn't budge after about 500 ft. That's when it snapped.Attempt three, we removed all bends from the conduit and fed the cable through section-by-section. It pulled like butter. It's amazing how much friction a bend creates.Long, long story short, we finish pulling the cable all the way through the bends, gripping the actual cable iteslf -- pulling and bending it in an unsavory fashion. We finally hook it up to the switch and whammo! Gigabit speeds from point to point! I was beyond words... I was SURE that we had damaged the fraglie fiber optic. I was sure we streched the cable to oblivion... Nope. Baby was working like a charm.I'd give this cable 50 Stars if I could.I definitely know what kind of cable I'm buying for any other jobs.

I pulled this through 650' of sweeping, no 90, conduit. Pulling so hard twords the end I broke the eye pull.Two thoughts here, amazing it still works but I'm the 2nd reviewer to comment on breaking eye pull. Maybe they should have a bit beefier pull for the longer lines as they can assume your going to be pulling it a long ways?I know its a swivel head, but i would recommend tying a backup knot on the other side of the pull eye if you are pulling this a long ways and it's critical it doesn't break.

This was a replacement for a cheaper fiber cable that did not work after pulling through 30' of a 1" conduit. No issues with this cable after pulling. I added a picture showing the difference between this cable (thicker one) and the one it replaced.

Works as should. No RX or TX issues

Did exactly what I needed it for!