IdeaFormer-3D PEO PET Smooth Build Plate for Bambu Lab X2D X1C X1 X1E P1P P1S P2S A1, PEO PET Spring Steel Sheet Flexible Bed Plate for Bambu Labs X1, X1 Carbon, P1P, P1S, P2S, A1 3D Printer Platform

GREAT (once you adjust settings like they tell you). With only changing the build plate type, the first print adhesion was pretty poor and I cancelled the print. THEN I read the instructions (in the listing and included in the box) better... keys for success with Bambu P1S: CLEAN the build plate with isopropyl alcohol. Use Smooth PEI/High Temp Plate as build plate type. Use build plate temp of 60-65C in filament settings (all layers).

UPDATE: After printing 2 different plates, 1 plate twice (broke off needed pieces removing supports - lesson learned), all prints have completed without any issues. I have yet to re-clean the plate since I started using it. On my 4th print, will clean with soap and water after this. No stringing, warping, or adhesion issues using PEI plate settings. A+ Out of the package: Washed the plate with Dawn soap and warm water, dried and placed on my Bambu Labs A1. Currently printing a CyberBricks remote controller housing on the carbon fiber side, using Overture Matte Gray PLA with a 4mm outside brim and 0.2 gap. So far so good. Will give update if any issues with warp or adhesion. Bed is set at 65°C Extruder at 220°C.

Maybe this build plate has worked for other people, but for me it has been the worst build plate I’ve used, returning it right away, I did all the tests and the suggested adjustments, and for me had zero adhesion no matter what, I really had some hopes for it his one, but sadly it didn’t ended nothing well, I thing I will go to my previous one that is more expensive, but works. I have plenty of different build plates that work really well just out the package, I did my best with this one switching between plate type and Z distances, and different filaments, nothing worked.

This plate works great with my Bambu Lab P1S. It fits perfectly. Good Value for the Money. Love the design it leaves on my print. Worth the money, to add that little extra to your 3D Prints

I had to adjust my bed temperature slightly for optimal adhesion, but once dialed in it has performed extremely well. Prints release cleanly after cooling and the surface finish looks great on the bottom layers.

I struggled with the rating on this. The sticker used on this is very easily scratched even a plastic scraper will scar this plate. I have to use hairspray with every print not a big deal just a call out. The plate fits the xy dimensions well, but the alignment guide is a fraction to big for my p2s. That being said as long as you don't touch the plate during the print it works fine. I'm going to take my dremel and carve the edges down so it fits properly.

This was my first time using a textured build plate on any of my printers, and I’m really pleased with the results. For this setup, I tested it on both my Bambu Lab P1S and X1C. Initially, I expected some additional configuration since it’s a third-party build plate, but the process was surprisingly simple. The only adjustment needed was selecting “Smooth Build Plate” in the Bambu Slicer app. The X1C requires one extra step, and that is to disable "Enable detection of build plate position." As with most smooth build plates, getting good first-layer adhesion can be a bit tricky. My go-to solution is a light coat of hairspray on the surface; works like a charm and consistently gives me perfect prints.

This dual-sided plate is a game changer for my Bambu Lab A1. The PEO side leaves a beautiful, multi-dimensional pattern on the bottom of prints that catches the light brilliantly perfect for decorative items or custom branding. The PET side provides a smooth, sleek finish that rivals professional injection molding. Adhesion is surprisingly strong for a smooth plate, and parts release easily once the spring steel is flexed. It’s a must-have for any maker who wants to elevate the visual hierarchy of their prints.

んーバリがありビルドクオリティは低いですが、用途的には十分使えます。値段を考えれば、まぁギリギリ許せる感じ。