Matane Motion Sensor LED Ceiling Light with Remote, 12 Inch Wired Flush Mount Ceiling Light 3000K 4000K 5000K, 2400LM Dimmable Motion Sensor Light Indoor for Closet Hallway Laundry Stairs White

I recently installed this motion-sensing ceiling light in my hallway, and it has completely transformed the space. The installation was straightforward, even for someone like me who isn’t particularly handy. Once set up, the light immediately impressed me with its responsiveness—detecting motion quickly and turning on without any noticeable delay.The brightness is perfect for navigating at night without fumbling for switches, and the sensitivity can be adjusted to suit your preference. I also love the energy-saving aspect; the light turns off automatically after a set period of inactivity, which has already helped reduce my electricity usage.One small downside is that the sensor can sometimes pick up movement from adjacent rooms if the doors are open, but adjusting the detection range solved that issue. Overall, it’s a fantastic addition to my home that adds both convenience and efficiency. Highly recommend for anyone looking to upgrade their lighting!

This was quick and easy to install. Its bright and looks and works well.

I purchased 2 versions of this light, the 9" and the 12" to test in my closet. I stuck with the 12", but the review could apply to both since worked very similarly. I needed the lights to replace a fixture that was installed when the house was built, roughly 7 years ago. I installed a smart bulb with an external motion sensor a couple years ago, but it has sense stopped working and would not reconnect to Wi-Fi. After finding these at the price point I wanted, I wanted to give them a try.Pros/Cons:Pros:- Ease of installation: The mounting bracket had plenty of slots to match up to a variety of electrical boxes in the ceiling. Once the mounting bracket was installed, a metal wire on the back of the light allowed the light to hang from the ceiling while the wiring was completed, making the installation very easy.- Price: I paid around $37 USD for the 12” light. This was one of the cheaper options for motion sensing lights- Quality: For the price, I believe this is a decent quality light. It is plastic, but I didn’t expect a designer light for $40- Motion detecting: The motion detecting is spot on. It does not use the same type motion detecting where a sensor has to see the motion, like my old set up. This can be set to detect motion through thinner walls or doors. I’ve walked past the closed door and seen the light come on. This can be adjusted down, which I have mine set to the minimum range and still have it pick me up here and there, but with mine only staying on for a minute, I don’t mind it popping on here and there when I’m walking by.- Remotes: The remotes are the normal, cheap remotes you find with most of these type lights. The part I like is the remote from the 9” size works on the 12” and vice versa. That means if you have multiple lights, you can keep track of a single remote or have a backup if you wish. Or you do not have to worry about mixing them up.- Brightness: The 12” lit up my walk-in close very well. The bright white setting really gets into some of the areas my other lights could not reach.Cons:- Hole size for wire: This is more of an issue with the 9” size. If your wiring is the single wire and not the braided, stuffing the wires through the cutout for the wiring can be a challenge. I struggled to get it back through. For the 12” size, it was not quite as difficult- Light selector switch: To change the tone of the light, there is a selector switch inside the framework of the light, so you must unscrew the light, select the color you want, then put it back. I would like to have seen this as a remote option.- Wire nuts: The included wire nuts are not ones I like to use often. Without the wing on the bottom, they can be hard to get sufficiently tight.- Look: While the look isn’t bad, you can definitely tell it is not decorative or high quality. If that’s what you’re going for, this is not the light for you. I used mine in a closet and did not care really what it looked like, so it worked great in my application.- Stripped wire length: The wires were not stripped very far down. I like to make sure the connection is very secure, which means having the wires wrap around each other a couple times. I had to strip off a little more than the coated section of the wiring out of the box.Summary:From my experience, these lights are a great option if you are looking for a decent light for most applications. As I stated, I put mine in a walk-in closet, and it has worked great since installation. The look of the light is somewhat cheap, but if functionality is all you care about, this is a great option! One recommendation I’d give is to have a set of wire nuts that have the wings on the bottom. They are easier to use and seem to work better than the ones provided.

Low profile, easy to install. Good light output and adjustable motion detection range.

My son has a brain injury and forgets to turn off lights so having this style in our halls and bathrooms allows him to just walk in and there is light and it will go off automatically within the number of minutes I have set.I use switch covers on the actual switch to keep it in the upright position.You can set the lighting from a warm yellow to bright sunlight and anywhere in between.With electricity bills getting higher and higher it was so frustrating not realizing he had gone into the master bedroom bathroom and finding the light on hrs later. This light has fixed that it’s off a couple minutes after he leaves the restroom(s) as I have them in both now as well as the hallway.Easy to install, easy use of remote. Well worth the money.You can set the motion detection for distance such as I have it set that you must be very near (you literally have to be at the door entrance before it comes on) so that it’s not coming on anytime there is movement in the hall or master bedroom.I would recommend for anyone busy especially, elderly, disabled etc.

description states plastc and painted powdered coated which implies black ring is at least metal. whole thing junk plastic.

I purchased to put in my walk in pantry since my kid seems to forget to shut off the light in the pantry all the time! Does the trick perfectly. It has been in place for over 6 months and no complaints. I was skeptical at first because it has a remote control to it - but you can set it with the remote and forget it and never use the remote again (I don't even think I remember where it is at!). It mounted to where the traditional ceiling light was at in my pantry. I bypassed the wall switch so that the light is always hot and it doesn't accidently get shut off. As soon as we open the door to the pantry, it comes right on. Guests think it is a door switch because it is so sensitive to the door opening. We have it set to shut off after 30 seconds of no motion and it does as expected. Great purchase!

Great retrofit can lights. Installation was a breeze!!! Make a note that these are RETROFIT can lights to replace existing light bulb type can lights. Perefect for retrofit exisitng!!!