ESPEEDER 16Ft 6AN Black Oil Line 3/8 Nylon Braided+AN6 Hose End Fitting Adapter Kit

The package came promptly. All the parts were there and initially I was very impressed with all the pieces. I used the kit for transmission lines, starting with the angled ends to keep the line away from the under side of the body. Along the way up to the cooler, zip ties were used to hold the line in place. This afternoon there was a trail of drips coming into the garage, and upon inspection I found one of the hoses extra soft in one spot, and fluid seeping from the nylon wrapping. I pinched the hose up and down, and its only soft in the one spot that the fluid appears to be leaking out of. Unfortunately, that means the transmission has to be removed to replace the entire hose as I am now unsure of the structural integrity of the hose itself. I am rating this a 2 star though, as I will likely be able to reuse the fittings that came in the kit. Will upload pictures when able.

I wasn't able to use not one of the fittings. I have used many of the name brand AN fitting but these are the only ones I have ever had trouble with. the line was ok. I wouldn't use the line if its going to be under a lot of heat but the fittings inside diameter that you put the hose in was over a 1/16th too small. you could not get the hose in the fittings for nothing. I took a name brand fitting and these and checked each with calipers and these were almost a 1/8th inch too small. suppost to be -6 fittings. I even cut all the nylon off around a piece of the hose just to see if it would fit into the fitting without the nylon and it still wouldn't go into fittings. I recommend not buying these and buy some USA made namebrand fittings and line. not worth risking burning my car down because of these cheap fittings and line

Tried to use these for an add on transmission cooler, slipped them over the stock metal connectors and they crumbled, good thing I leaked checked the vehicle, I had ATF fluid spraying everywhere....pulled them off and used the cheap hoses that came in the box with the Hayden tranny cooler.... no leaks after that. what a waste of $66 and my time.

Product was exactly as advertised, prompt delivery of package, everything was in great condition not damaged and great packing. Very easy to use and assemble according to the directions. I have installed on my vehicle and this product was flawless. Also having a few fittings and about 5 ft of hose to spare. No leaks in my fuel system which is running at 60psi and the product looks great. I highly recommend this product to anyone who is looking for a high pressure fuel hose with AN fittings. I know i will return to this seller to buy more when i need it. Thank you so much for everything you guys did to ensure my transformation from carb to fuel injection was flawless.

i replaced the OEM fuel system on my 04 Sti ( Under the intake manifold, new fuel rails injectors ect) the kit performed flawlessly. These are the only high pressure An lines ive made so i cant speak on how easy assembly is but it is performing perfect with no leaks

Works as it should, some reviews say the fittings are small but I had no issues

Just using for fuel tank and axle vents, don’t know that I’d be comfortable with 100psi fuel pressure on them

If you value your time keep looking.... As expected Amazon delivered a product in a timely manner and the fittings looked great. Until it was time for assembly. 2 hours later and I barely had 3 fittings installed. I completely understand these are not Parker or Weatherhead fittings; but totally did not expect the problems to arise from the inability to install fittings on the hose.