WochiTV Solid Rubber Strips Rolls, 12" Wide x 1/8" Thick x 48" Long Neoprene Rubber Sheets Perfect for DIY Gasket Material, Sealing, Liner, Shield, Padding, Mat

Works well

This product was perfect for making a heavy duty gasket. It was easy to cut and manage.

WOULD BUY AGAIN

Exactly as described. I used this to wrap around some fuel lines in a boat to protect them from abrasion. I drilled holes in the rubber and passed zip ties through the holes to cinch it all together. Even though the sheet is quite thick, the zip ties did tear it fairly easily. It’s because it’s pure rubber. Unlikely it is vulcanized which would have cross linked the polymer and made it tougher. The sheet is easy to cut with scissors or a box cutter.

I purchased this to make a replacement gasket in a 1969 Camaro air vent. It was exactly what I needed.

Needed something to wrap around my motorcycle fork to put bracket on. At least bracewas expandable. Wish I find something thinner.

Gaskets can sometimes be hard to source. I fixed my riding lawn mower several years ago by making my own gasket from a bicycle innertube. It was a carburetor gasket that time. I don't expect it to fail any time soon either. This WochiTV Solid Rubber Sheets checks all the boxes. The trick is to get a template of the gasket you need. I traced the outline on a sheet of paper. Then cut. It will cut with scissors, but I found that the easiest way to cut this is with a sharp utility knife.I used this to fix a failed gasket on my boiler's circulation pump. It has a small leak that probably could have been fixed with silicone, but I wanted a more permanent fix. Unfortunately, the old gasket fell apart as I was removing it. Otherwise, that would have been the perfect template. The last picture shows my finished gasket. I did make some more cuts to make it fit better. The boiler system operates at 180 degrees Fahrenheit and varies from 12 to 20 pounds of pressure. I don't think this homemade gasket will fail for years, if at all.I got the 1/8" thick gasket material but could have used the 1/16" just as well. The rubber does have some 'give' to it so when I tightened down the bolts, it compressed nicely. Sort of what you want a gasket to do. This helps provide a nice tight, leak resistant seal. I wouldn't be reluctant to use this on a more demanding project.The material appears to be well made and sturdy. It wants to hold the shape of the roll it is shipped in, but with some work I was able to flatten it out. Great product to have on hand for the occasion when stores are closed, or you can't find the right gasket. I assume this material can be used for many other things. I have enough left over when I do find another use. Great product. Great price.

good to have around

The rubber sheet arrived well packaged and it was wrapped in a protective plastic sleeve with the ends tucked in, inside it was rolled up tightly and bound with some clear sellotape. It measures almost exactly at the advertised dimensions in height and length, and according to my digital callipers the thickness is also close enough at between 3.2 and 3.4mm across a dozen spots.This is a big sheet of thick synthetic rubber that can be used for a huge range of tasks around the home, garden and workshop. As I mentioned in my title, I grabbed this primarily to use as an airtight gasket material between the polycarbonate lid and the body of a vacuum chamber I'm planning to construct. The sheet is a continuous single piece and it is made to a fantastic standard, there are no inconsistencies or weaknesses across the entire piece and it is cut cleanly & squarely to the correct dimensions. It isn’t difficult to work with once you’ve managed to flatten it out a bit, using a fresh blade in my Stanley knife made quick work of trimming it alongside a straight edge.I will say that the inside of the rolled up sheet was fairly dirty, but nothing a quick wipe with a soapy cloth couldn’t sort out when it arrived. As expected and mentioned in the product listing it had/has a distinct rubber smell that takes some time to disperse, but other than that this is a great piece of material for the price point. £10.99 is hard to beat for this thickness and size so I'll absolutely be back for more when the need arises.

This rubber strip is 0.32cm thick and can be used for various DIY projects. I used it to fill a gap where the rubber was missing in my conservatory door. It’s solid rubber which make it versatile and reliable.

My partner wanted this to deaden the sound from aquarium pumps.It’s a thick square pad so he hasn’t needed to cut it or anything but it would be easy enough to do so.It seems to be very effective at reducing noise from vibrations.It’s a very good quality and useful material with many uses. Seriously- read all the other reviews! People are up to all sorts with this stuff!I think I might buy some of the strip to have for odd fixes around the house.

This has solved a problem for me. A friend made my elderly dog a step so she could jump into the car more easily, but she couldn't use it as she kept slipping. So I have stuck this rubber strip onto the step and it's perfect, she has grip and is no longer scared to use it.The rubber itself whiffs a bit when you first open it, but that was to be expected.I can think of a few more uses for it so I shall be buying more, both the 31 x 31cm sheet and the roll.Highly recommended.

I used this for a boiler after a fill hatch seal started to degrade.This arrives as a rolled sheet of rubber. Just unroll and cut to size. It is very easy to use. It is black so I normally use a chalk pen to mark out a template then cut with a scalpel. It cuts smoothly and easily.I've already done a test run and it seals nicely without tainting the contents. Good quality and value. Recommended. Thank you for reading my review. I hope you found it useful