suptekMonitor Mount Single Monitor Mount Stand,Gas Spring Monitor Arm Desk Mount Fully Adjustable for 17 20 22 23 24 26 27 inch Monitors Weight Capacity up to 13.2 lbs (Silver)

This is excellent: it does the job with aplomb. The monitor is secure and where I want it and space on the desktop where the monitor's base used to be is now free. (Actually it is on a Mission-style side table, working as part of a three-monitor setup. Adjusting to the same height and orientation as the other monitors on the main desk helps greatly.)It is solid and secure, obviously well made and well thought out. It easily clamped onto an edge about three inches from the top of the work surface. Assembly was easy for somebody with my limited skills in getting things to work and stay together. When so many items online are not quite as good as they seem, this stand is better. In short, a rare find.

I have a 27 inch monitor that i use for my mini studio. I was running out of room on my desk and thought about getting a monitor stand, but was concerned that my desk was up against a wall. I looked at plenty of stands online and decided to give this one a try because of the features and it was in my budget. It came the next day and when looking at the arm, there was a yellow warning tag on it stating that it was under high pressure and to use two people to remove the strap that was holding it in a closed position. I noticed that the strap was loose and didn't appear to be under stress. I loosened the strap a little more and let it slide off while I held the arm with both hands and slowly let it open. In my case, it wasn't anything too sudden or violent and I had no problem with any sudden expansion.There wasn't' much to assemble except the bottom clamp which just hooked onto a bracket on the arm. I tried sliding the mount from the edge of my desk a could of times, but the clamp part kept coming off, So I got some duct tape to join the two pieces while I slid the bracket in place. It was easier than expected and there are 2 positions to attach the clamp to the bracket for thiner or thick desks. Mine was less than an inch and I was able to tighten it from the side of my desk instead of having to get underneath it.Since my desk is against the wall, I placed my mount to the side of where the monitor would be used. If I were to place it directly behind the monitor it would limit how far back I would be able to place my monitor. Being on the side works pretty well and allows me to move it up and down and back and forth. I use a dj mixer and found I could place it low so it looks like one unit while hiding a lot of cables, hubs and hard drives. This looks way better than the old set-up i had without the mount. Having the bracket to the side does limit some of the way to move the monitor, but I do not plan to do any major swiveling from left to right.The mount appears to be really study and has no problems supporting the monitor. There are adjustment for the tension to move the monitor up and down. There were long and short screws for a mounting plate to attach to the monitor, although there was no clear instruction on which ones to use for best results.I definitely would recommend it you're up against a wall and want something that is pretty adjustable. This has to be one of my favorite computer accessories purchased in a long time.

Even after tightening all of the joints there's still some play making the monitor stand seam slanted and moving with small vibrations. My panel is very small and light but still seems to be I bit much.it's unfortunate you have to tighten all the joints just to make the stand not wiggle, and then you have a hard time moving and adjusting the screen.The two main arms don't seem to extend out all the way and stay there even under their own weight. rather if the arms are extended trying to adjust upwards as well tends to not work.A little bit finicky but looks greatstrong materials but it's unfortunate for the mounting mechanism. (if your desk has a metal frame it's a hassle... this product SHOULD COME WITH a method of mounting using a NUT AND BOLT SYSTEM rather than clamp.)despite its flaws and what feels like misguidance, this is a great cheap option.

Very easy to install. The cable management is great as well since it is built in and you can barely see it. Works with pretty much all standard monitors. It holds so strong to my desk that I am able to life the desk from the arm itself. Easy to adjust , but it also just stays where you want it for months on end. Other brands start to sag over time and lose its strength. Would recommend to gamers.

This mount is great. It's holding my new 27" monitor right now. It's sturdy and I'm able to put it in almost any position that I need. The clamp is great and will work with almost any table or desk. Easy to install. High recommend.

Great arm. Very cost effective but punches well above it's class. I currently have a drawing tablet attached to it and it works perfectly

It was semi-easy to setup after overcoming a few issues. the mounting plate for the monitor is solid and my monitor had a stand bracket protruding from it so the plate couldn't connect to the back. i ended up using spacers to offset the plate.Mounting to the desktop was easy and is pretty stable.So my monitor weighs less than 10 pounds. The arm isn't strong enough to hold it up unless it is raised pretty high. Anything lower than the halfway point it just falls. I've adjusted the screw as much as possible, but it still falls. As luck would have it, I need to position it low so it just falls every time.

Been using it for a few days now. My impression so far is it’s a great product in terms of its quality and value for my particular use case (using it with my ancient 19” Dell monitor). Once I torqued the arm correctly per instruction sheet, it has been rock solid. Yes, cable management feature is a nice touch.

Quería poner una pen display que cuando no lo usará para editar lo pudiera poner como monitor y de todo lo que busque este era el más económico. El pen display es de 24 pulgadas y lo soporta muy bien fácil de instalar eso si tiene unas uniones de plástico que no se cuanto resistirá aunque en lo general se me hizo muy bien.

Muy práctico y a buen precio comparado con otros, ofrece una amplia gama de posiciones y se adecúa a cualquier escritorio o espacio. Solo que no es el mas firme ya que tiene algunas piezas de plástico que hacen que al moverlo no se sienta con la firmeza que uno quisiera, pero si lo quieres para mantenerlo fijo o con movimientos leves horizontales no tendrás problemas. El brazo con amortiguador de gas y la base se sienten bien hechas. Trae todos sus tornillos y herramienta. Calidad precio bien a secas.

Mejor calidad de lo que esperaba buen tiempo de entrega

This is amazing. It is super light weight compared to what I have previously usedPros: easy to assembleEasy to rotate tv/monitorLightweightSturdySmooth adjustments360 swivel.Cord paths to make things neatCons: Not a lot of up/down movement (about 8 inches worth?)

Esta es una guía para los cables y llego rota en dos partes cuando debe estar en una sola, no afecta el uso pero no debió haber llegado quebrada. Y la caja no traía burbuja.