Bambu lab PEI Sheet Double Sided 257.5 x 257.5mm(10.14 * 10.14inch) Textured PEI Sheet PEI Build Plate for Bambu Lab X1/ X1C/ P1P /A1 3D Printers

I was using the bed that came with my ender 3 v2 and thought it was pretty good. Well I was having trouble with abs adhesion so I decided to level the the bed closer to the nozzle. Big mistake. It adhered to the texture of the bed to the point I couldn't get it off. So I decided that I would use acetone to clean the bed. This was the nail in the coffin. It delaminate the top layer of the original bed. So I started looking through Amazon for a new bed. This one had great reviews so I decided to try it. Man printing has never been easier. My old bed had to be leveled every few prints. This one hasn't had to be leveled since I first installed it and have 20+ prints including one 25 hour print and counting. Abs does well and pla/ tpu is a breeze. No issues with adhesion and once the bed cools, the parts can almost be blown off. The only issue is that if you have a power outage and the bed cools, you will have to restart the print. Best settings for pla for me are 60°C bed temp and 210°C nozzle temp and you can run 90 mm/s. If you don't want strings (I usually just run a lighter over the print to remove so nbd for me but.. ) I recommend 70 mm/s or slower. I have an ender 3 v2 so keep that in mind for those settings. But for sure worth a buy haven't had the chance to use the flat side. 100% worth the money.

So i got this because of the rave reviews and the ease of removing the plate from the bed. I was using the glass plate that came with my CR10, and some adhesive textured pads. Changing the pads out was a pain, and the residue made it difficult to get an even surface when replacing them. This would have solved all of those problems, if only i knew the metal bed to my printer was not even. I learned after installing this that it dips in the middle, which is why i was having problems getting this plate to work right. Thankfully i got the magnetic layer up without damage, and ill unfortunately have to go back to using the glass that i know was level. i might rig another glass plate with the stainless steel plate of this product, and go from there. I will say that it installed and functioned very well, for as far as i got with it. the texture was good, the plate was flat and even, and the magnetic pad was easy to stick on there. If only my printer was willing to cooperate.

I’ve been using Hictop PEI sheets for years now, an are absolutely fantastic! Pla, petg, pet-cf, and tpu stick like crazy and releases with ease. I never have had to use glue sticks with these sheets. They are very durable and easy to clean with isopropyl alcohol. Unlike the stock Sovol sheets that require light sanding and glue just to get them to kinda stick and usually warp up on me, Hictop PEI is like superglue for 3d printing. Do yourself a favor and get this over the others. You won’t be disappointed.

The build plate was well packaged and matched right up to the original. Everything I have printed has stuck well - as good as or better than the original. I clean between runs with rubbing alcohol.My only complaint (which is the star reduction) was the Hictop label. It was composed of adhered raised letters. They were already falling off in the box. They were easy enough to remove - just seems like they should be left off instead of making a mess (cannot print with them there anyways).

I've been using this product for the past few months. It's construction feels lower quality then the one delivered with my Bambu printer, however, the smooth side has become a stable in my printing. I do not have unexpected bed adhesion problems and my printer has quite consistently been utilizing this sheet.My only thing that is close to pushing to 4 stars is the smooth plate is easily scratchable (I haven't noticed any printing defects as of yet from the scratches) and it's quite thin. I worry that bending this might lead to permanent defects (yet to be seen).

Hands down best thing I’ve done to my printer. Sticks great during build and one cool print comes right off!

Performs as described. Easy installation and the surface is perfect for PLA.

Great filament adhesion.Easy to remove prints.

The media could not be loaded.  Easy to install and use...textured side works well, I have yet to try the smooth side but like the overall construction is very nice and works better than I thought...adhesion was good at 65° and as you can see from the video, it just falls off at room temp which was a pleasant surprise...no tools needed and it gets rid of those clips to hold the bed down, magnetic is 100% the way to go...a great upgrade to any 3d printer

La calidad de esta lámina es increíble, mejora muchísimo la adhesión de la primera capa. La compré cuando la original de mi Ender se rompió al desprender una pieza (la negra, no sé de qué material es), con esta estoy seguro de que no pasará lo mismo porque en cuanto la cama se enfría las piezas se despegan por arte de magia, ni siquiera tengo que flexionar la lámina. Tiene PEI por ambos lados así que sé que me va a durar muchísimo. Fue una gran compra

Ich habe schon diverse Stahl Kunststoff etc. Druckbettplatten ausprobiert. Das hier ist mit Abstand bisher das Beste sowohl bei Haftung als auch Wärme Stabilität und super robust. Während die Platte geheizt wird hält bisher jedes Filament. Nachdem die Platte abgekühlt ist das "Projekt" einfach abnehmen. Absolute Kaufempfehlung, sollte meine aktuelle Drucklatte Iirgendwann (!?!) mal durch sein, werde ich immer wider auf diese zurück kommen!

Spitzenqualität mit super Eigenschaften.

Grazie a questo piatto PEI ho risolto tutti i problemi di adesione con il PETG e ora le mie stampe sono perfette. Nelle istruzioni ocnsigliano un riscaldamento a 90° per il PETG ma nel mio caso funziona bene a 80°, sicuramente dipende anche dal materiale usato. E' stata una svolta perchè con il piatto originale della Artillery Genius non c'era modo di far aderire bene il PETG, ora va come un treno. Estremamente soddisfatto.