WaterdropSpotless Car Wash System with Resin, Deionized Water System, Spot Free, Works for All Vehicles, RV, Motorcycles, Windows, Boats, Planes and More, No Towel Drying.

There are enough reviews talking about how good the system is, so I'll spell out some things any buyer should know before purchasing. This will ensure that you don't waste your money and have realistic expectations.1. Make sure you know the TDS/PPM (mg/L) of the water supply you'll be using. You don't want your supply's TDS to be above 350-ish. If it is, you're only going to get a couple washes before the filters are used up. If the TDS is too high the filters won't be able to remove enough dissolved solids to prevent water spotting, making the system a bit pointless and causing the filters to be used up in a single wash. If your supply has a high TDS rating, I recommend adding a pre-filter to bring the TDS down to a reasonable level. My city's TDS was almost 450, so I installed a whole-home 3-stage filtration unit for my house and ran a line to the resin filter. If you go to the expense of adding whole-home filtration, make sure to exclude your exterior water bibs - typically there's no need to filter those, and it'll save a lot of use on your 3-stage filters if you use your exterior bibs often.2. Read the instructions - there is a bypass valve, and if you have it set to bypass you won't be using the filters and might get the impression that the system isn't working.3. Rather than guessing or estimating how many washes you can get before a filter change, consider installing an inexpensive multi-jet (MJ) flow multi-jet flow meter on the output of the filter system. You can use that to determine exactly how many gallons/liters/etc. the filters can handle before needing to be replaced, avoiding potential water spots when the filters are used up. I recommend a multi-jet meter over a single-jet meter as they are more accurate. MJ meters can't handle as high of a flow rate, but you'll want to keep the flow rate down when using this system anyway.As for the system itself? It works great, and my back is happy with all the manual drying time that is avoided.

If you're a car enthusiast who values maintaining a pristine, spot-free shine on your vehicle, a spotless car wash system with resin and a deionized water (DI) system might be your ultimate solution. Designed to leave your car looking professionally detailed, these systems are becoming increasingly popular among DIY car detailers.Resin Filters are at the heart of this system. They remove calcium, magnesium, iron, and other hard water ions through ion exchange. As the water passes through the resin, it becomes deionized, ensuring that you won’t have to worry about annoying spots or residues on your car after washing.Pros and ConsPros:Eliminates water spots, reducing the need for additional drying.Protects your car's paintwork from mineral damage.Easy to set up and maintain.Saves time and effort in washing and detailing.Cons:Requires replacement of resin cartridges.The initial investment may be higher than traditional washing methods.Effectiveness may vary based on the hardness of your local water supply.ConclusionA spotless car wash deionized water system is a game-changer for achieving that professional-level, spot-free shine on your vehicle. While the upfront cost might be higher than your average garden hose wash, the benefits—like preserving your car’s paint and reducing the need for costly detailing—make it a worthwhile investment for anyone serious about maintaining their vehicle's appearance.Investing in a spotless car wash system is an investment in your car’s longevity and shine. Say goodbye to water spots and hello to a flawless finish every time!

Reduced our hard water from 320 ppm down to 7 ppm at 1 GPM. The water out of the hose was 3.6 GPM, so we had to almost turn it off to get flow rate down to 1 GPM. I recommend getting a flow meter for best results. Hose connections take some fiddling to get leak free.

I just bought a brand new truck and I've been using this to rinse the truck after washing it. Works really well. I wish the filters were a little bit less expensive.

Installed this filter system for my pressure washer. Really helps with water spots. Highly recommended.

Great product. You need to buy adapters on in/out connections but the valve system works amazingly and makes your car wash easier.PPM went down from 225 to 5 PPM like magic. Resine filters don't last long though.

This product claims it reduces hard water spots, well not at all. It's so expensive. It doesn't work at all.

Just put this together inline to my pressure washer. Junk the teflon tape that came in the box. It is crap. Also I see photos that connected directly to garden hose. The threads are pipe threads so you need adaptor on both sides to connect to garden hose set up. Both 3/4 but one is tapered. Tested the was and got sub 15 reading from 200 plus. Washed car in sun today and worked awesome. Left some spots on purpose. Must have for car detail but.