Thermal GrizzlyWireView GPU - 1x12 VHPWR to 3x8 PCIe Normal - GPU Power Consumption Measuring Device - PCIe Power Connector - Real Time Direct Monitoring - Made in Germany

Replaced the Cablemod angle adapters even the "fixed" ones they gave me with this thing. Looks great, fits great, no issues with my MSI 4090 Gaming Trio so far. It is quite large so make sure it fits your setup. I went with their 3x 8-pin version.

One would think that a product coming from a company led by der8auer would at least offer detailed measurements for clearances, but alas that wasn't here. It would save the hassle of finding out later on that the WireView wouldn't work with your setup. Even generic no-name adapters depict clearance measurements in their photos, yet an engineering focused company like Thermal Grizzly doesn't.The biggest issue is that the spacing between the inputs and output is too close together. If there was an extra 5-6mm of spacing between them it would be ideal. Even with a stock 4090FE I was unable to get the WireView to seat properly due to how close the input plugs were to the graphics card backplate once the input connectors were attached. With an aftermarket waterblock, it was impossible (as shown).Another issue is how wide and shallow the 12VHPWR connector is; if the 12VHPWR connector on your graphics card is recessed in any way, the WireView more than likely won't work.I won't leave a scathing review without providing constructive criticism for potentially a 2.0 revision: there's an attached image describing what should be changed to improve compatibility.Also functionality was fine, no issues there. It's simply disappointing that these shortcomings are present here.

Unfortunately it doesn't have enough space between top and bottom connectors to clear the back plate of my Zotac 4090 you can't plug any cables into it once it's fully seated in the GPU needs to be at least 1cm higher to safely use those plugs without any risk of bending