LINZI Telescopic Tree Pruner 7M with 350mm Extra Blade Extendable Long Reach Pole Pruning Saw Tree Loppers for Cutting Trimming High Branches Leaves Shrubs

Does the job as required.A certain amount of strength and skill required for operation.

This extendable lopper has some really good points but also a coupler of design flawsUnlike so called "extendable" lopper where you have to screw extensions on to the handle this is truly extendable. It's well constructed, doesn't flex like some cheaper versions and the large jaws allow cuts through green branches up to 30mm with ease.There are a few issues though - The jaws are permanently fixed in line with the pole which makes it easy to slip the jaws over a near horizontal branch but really difficult to get them around anything near vertical. The jaws work with a pull cord via a pully system which sticks out from the back of the cutting jaws making it difficult to use among close packed branches. The total pull on the cord to complete a cut is around 1m which, unless you have very long arms, means you have to pull, take up slack and pull again to complete a cut.Finally there were no instructions how to fit the saw blade nor any bolts to do so - it took a bit of fathoming out and a trip to the hardware shop for bolts to get it fitted

The extension of the pole was to reach higher branches. Very light to use. Value for money. Fully recommend.

Excellent value for money dealt with my conifers no problem, havnt tried the saw yet as not sure how to attach but the loper part works really well and I’ve already cut thicker than 35mm. I have the 7m version and must say when full extended it’s a bit of a nightmare and gets a bit bendy but for 5m or so works amazingly well

Needed an extendable "pruner" for some high level branches overhanging my garden. Due to the height, I needed a pole that could go over 6M and this ticked the box. Unfortunately, as some of the branches were close together it made access / cutting difficult when the pruner piece was bolted on (which you need to do to fix the saw blade to). FYI, with the pruner attachment added and the pole is fully extended it can be a little awkward to control. To get round this I found a piece of alu pipe, which went over the pole small end. I drilled 3 holes (to align with those is the pole end), flattened the other end and drilled 2 holes to bolt the saw blade on - worked great. Very pleased with the height I could cut branches at and it saved me the expense of getting a tree surgeon in. Just be careful though with cut branches falling from high levels!! 5 stars for the end result, 4 starts as I needed to make a small adaptor to fit my needs.

Brilliant for trimming my 18 foot tall bBayleaf tree x a happy pruner haha

Looked for ages for a Lopper with decent height, bit wary of this as it says 21ft but it absolutely does what is says on the tin.So easy to use just hook it over the branch and pull.Am very pleased with this has cut branches over 30mm as in photo with no problem.The photos show just 20 minutes work with NO LADDER.