RP Remarkable Power, Fog Light for 2000-2006 Tundra (Not Fit Steel Front Bumper Models)/ 2001-2007 Sequoia with 9006 12V 51W Halogen bulbs and Wiring Harness& Switch Clear Lens Lamps Kit

these lightrs were so easy to install. it took less than 2 hours, even with the bumper removal. easy to follow instructions

Not a perfect, fit but nice bright light.

I didn't rate the brightness, because I changed the bulbs to new LED bulbs and didn't even look at the ones that came with the fixture. I used the OEM wiring harness, not the kit that comes with these fixtures. If your truck does not already have fog lights, the wiring will take a lot longer.

Installation took about 2 hours and no major issues. Bulbs are bright but they are halogen not LED (not a big deal. You don't have the bright white light that LED provides. Great value for the $$$.

No complaints.. they fit right and look way better than the old dull yellow ones. Also upgraded them to LED bulbs. I can definitely see better driving at night now.

I installed these fog lights turn signals and headlights up front on my Toyota Sequoia and I can't believe how much more better it looks it looks like a new truck inspires me to keep it washed clean I smile every time I look at them great deal and work terrific

Anybody can replace them, it's quite easy. The wiring harness will be hard to run if you've never run electric relays before. My lightbulbs connector came broken, not a big deal as I have leds but something to keep in mind.Installation:1. Remove your headlights, there should be 1 pin and 4 bolts per side.2. Remove your old fog lights, I use a flat head screwdriver to pry the sides apart to unclip it and then push it out.3. Remove the plastic insert at the bottom of where your old fog lights used to be, needlenose pliers work great.4. Get your new ones ready, pull off the plastic, and make sure the plastic insert is straight.5. Put them in, gently. Don't force them in, they should not take much pressure, make sure the insert is clipped in and the two sides are clipped securely.6. Connect and test your bulbs. If your vehicle doesn't come with stock wiring, you'll need to run your own, you can use the included wiring with a switch. You can try and find videos online or find a buddy that knows how to run electronic lines.Personally I had to bypass the stock wiring quite some time ago, it was acting up with my LEDs, I ran a relay with 9006 harnesses like you normally would, and for the switch I ran that wire into a fuse tap and tapped it into my headlight fuse. No separate switch for them but if my headlights are on, they are on. And no wires run through the firewall.

Awesome fog light housing. Easy to install (if you get the right ones to fit according to spec that is). I would recommend buying, it’s worth the buy for the price..!!