JnDee12V 6A 6 amp 72W AC/DC Power Supply Adapter Transformer, for CCTV, LCD Monitors, TVs and LED Strip

This is a good product I bought as a power supply for my 12 volt cctv cameras and all round it works perfect with a good input and output cord length , I can’t complain it simply does what it should at a low cost , 👍

USED IT TO POWER UP MY CCTV CAMERAS

This works and is compatible with my wahoo kickr smart trainer and fast delivery thanks

Perfect for me

12V 5A 5 amp 60W AC/DC Power Supply Adaptor Transformer, DC Jack 2.1-5.5mmI was stuck after finding Synology provide no spare part supply fo the NAS's they sell through retailers, instead leaving that for the external retailers!So this saved the day! Yeah its says for LED lighting but it can do anything as long as the external load matches/exceeds you requirements.NAS now powers on and is very tolerant of the new power supply. I was surprised at how cool the brick runs also.The Jack dimensions are as they describe, although I did find for my NAS it was about 2mm too long. This did not affect the connection or security of the fit, but did look a little naff. I easily fixed it by using black PU outer casing of another mains cable cut to a 2mm ring and stretched over the jack covering up the surplus shiny metal and providing a hard stop up against the case.|\improvise, Adapt, Overcome!

The JnDee 5Amp 12V power supply is quiet, both electrically and acoustically. The regulation seems to be good with very little hum or ripple even at the 5Amp rated maximum output.I’m using it to power some LED lighting and it is supplying a measured 2.5Amps without getting too hot (only about 35°C) in the slightly restricted location.I needed to fit a 1Amp fuse in the mains lead; the supplied 13Amp fuse will not protect the lead or the supply.However when I tested it at just under the 5Amp maximum current with a 2.5Ohm load resistor, just sitting in the open air (at 20°C) on the workbench, after about fifteen minutes the temperature of the power supply had risen to about 60°C, which is hotter than I would like.Wrong fuse and hot working lose it the star.

I have had this powering my 80W LED Strip Lighting for almost a year now and so far, it has been great. No issues whatsoever. I have the lighting on for about 5-10 hours a day and it copes with that just fine. I have not noticed it get especially warm, just a normal temperature for a power supply. So overall very happy with this product and would definitely recommend and would buy again.

Seems to work fine and doesn't get too hot.Am quite certain the mains cable doesn't comply with our electrical regs. It's supposed to have 0.75mm sq cable fitted but when I stripped it back to shorten the cable, the outer insulation was very thick and the inner copper looked more like 0.3mm sq. Threw it in the bin and used another. It will be fine to power this but the reason they specify 0.75mm sq cable should be used on these kind of IEC cables is so it will power things up to the maximum rating of the connector. I wouldn't want to power anything over a couple of hundred watts with this cable and definitely wouldn't use it for a powerful games console or pc.It's also not quite as pictured. Mine doesn't have the nice flexible figure 8 cable on the output, it has really thick and stiff round cable which goes where it wants not where you put it.