WeCooper 304 Stainless Steel Gravity Grille 150mm 6 inch Ducting Air Vent Cover with Not-Return Shutters

Really nice design and quite easy to put in place

Fitted with ease, just be careful of the edges when putting on the seal, very sharp! Fitted in under 10 minutes and works well. As mentioned before you will need micro magnets to make sure the flap stays shut. Update: magnets arrived, I didn’t realise, they don’t stick to stainless steel.

Bought to fit on an outside wooden workshop wall to dispose of paint fumes from a spray booth in the shop. Fits well at 4inch. Has a rubber gasket to provide a weather seal. Been working well over last week or two. Flaps open and close /seal well keeping weather and insects etc out. Stylish polished metal finish. Well happy so farIan

Very happy with this product and fitted it straight away and it working well on my tumble dryer, plus it made from steel, so should last longer, only issue is no instructions in box about, as a seal came with it but it didn't fit, but vent is working well without it

This is a very solid product and very easy to install. Great value for money

I have fitted a number of these vent covers as they are of high build quality, stylish and functional. Very easy to fit and, despite reviews to the contrary, the 'rubber' seal does stay on sufficiently long enough to fit to the wall. Steel thickness may appear thin 'in the hand' but is certainly sufficient foe the job and, once fitted, is robust and sturdy. I will buy again and recommend this without hesitation.

(Read below about the seal)It is made of thin pressed spot welded metal and the flap (on mine) was slightly out of alignment, so it wouldn’t have sealed. I bent it so it did and the spot welded hinge stayed attached.The seal is gravity closed, but it’s quite light so it does (nearly silently) flap in the wind, I solved this by glueing two tiny neodymium magnets, one on the bottom of the flap (outside) and one inside (so it lines up).THE RUBBER SEAL: There is a channelled rubber seal which is slightly too small for the metal, this is meant to stretch on and stay there, it doesn’t. I placed it on several times, even holding it in place when I placed it against the wall, it still came off one corner, by this time, the internal clips had gripped the panel so I couldn’t easily remove the whole thing.It took me about 30 minutes trying to tease, (while up a ladder) the seal so it was in the right place. Do yourself a favour and tape it on at the corners.Summary- it’s working well and looks good, if you need a good seal, then add some tiny magnets.But definitely tape the ANNOYING seal or use sealant.Would I buy another, if needed, probably.

seal didn't fit but wecooper soon sorted this problem out. great company . will defiantly use them again.

Estéticamente qeda muy bienFunciona perfecto 👌

Alles hat gepasst

Das Produkt entspricht der Beschreibung.

No me ha gustado

Ottimo