Engine Motor and Trans Mounts Compatible with 2007-2017 Altima 2.5L, Replace OE A4339 A4340 A4350 A4353, 11360-JA000 11220-JA000 11350-JA00A 11210-JA000, Set of 4

Due to winter rust, I needed to replace two front mounts but ended up replacing all 4. They all fit nicely and seemed to be high quality. One tricky part was getting the transmission bracket seated onto the new mount that bolts to the transmission (front passenger side). In hindsight, I would recommend you remove the transmission mount from the car with the bracket still attached. There is just (barely) enough room for you to do this after removing the 3, 14mm bolts from the transmission (see pic) and the 3 bottom bolts from the mount. Then you can take the bracket off, see how it is seated, and put the new one on. I couldn’t even hammer the bracket on the new mount but was able to seat it after aligning it perfectly and then use an impact wrench to drive it on. If you look at the old bracket, the size is right and it’s supposed to be snug. With the bracket in place, you can then install it with just enough room back into your engine and align it with your transmission. Anyone who claims their engine still rattles after installing these parts, likely messed this part of the install up (i.e. didn’t seat the bracket correctly onto this mount) or has another problem entirely. My car is super quiet with all 4 new mounts installed. Also, I snapped one of my old posts off my old rusted mount and was unable to get the nut off. If your old mounts are really bad, you may want to order some high grade (10.9 or 8.8) M12 – 1.25mm flange nuts, which will fit the threads on most of these parts. M12 is easy to find but not with a 1.25mm/fine thread. I went to three hardware stores and couldn’t find one with the flange head like is used. Great set of replacement mounts at a phenomenal price! Install is a bit tricky but that’s not the product, rather my shade tree status!

Hasta hoy todo bien esperemos que dure muchas gracias

Excelente

These fit my 2012 Nissan Altima 2.5S perfectly. I had to replace my OEM engine mounts after 12 years. These were a great deal and I hope they last 12 years like my last ones.Update: these started to fail in January 2025. I just replaced them today 03/01/2025 with another brand. Two of the mounts went bad.

El producto no encajaba con los hilos q tenían el original

Tengo corolla 2005 y funcionaron perfectos.

Easy to install.

Quedaron muy bien