Bosch2609255270 Flat Drill Bit with Diameter 26mm

Granted, I hadn't used one of these Spade Bits before, but I am really impressed with how clean a cut is produced, even in soft wood.Bizarrely good value. - - -Bought at £3.09, with free Prime delivery.Item was delivered on-time, as-described, and suitably packaged.

Purchased to male diameter holes in wood for Christmas project. Did the job and still remains sharp. Only criticism is that they do not allow for a fine finish and the split wood when coming through other side (this is a common issue with flat drill bits). Happy with purchase.

Likes:Easy to use (warning, it does matter which way it spins)I can fit m24 external threaded stuff through it quite wellSolidly builtI'm happy with itDislikes:N/a

Good quality

I used to think drilling holes a tedious experience but since purchasing this sharp well made bit I find drilling 32mm holes thrilling

Last weekend I needed to place a new spy-hole into my composite front door to allow the placement of a Ring Door View camera. Despite having a comprehensive box full of various drill bits I naturally couldn’t find the correct size of spade/flat bit that I needed. Amazon came to the rescue with a well priced offering from Bosch, and it sailed through the job in hand.If you’ve come to this product page for the same reason I have then I’ll share my method of spy-hole installation which worked well. For the Ring Door View camera you can install the camera into a hole of 12-14mm in diameter, but the larger holes will require you to fit the additional attachment that comes in the box. I used a 12mm flat bit and it all fitted perfectly. Assuming you’ve measured out the placement of the hole correctly (leaving room inside and out for the box of the camera/battery), I’d recommend using masking tape over the drill point to prevent scratches from any slips, and doing a pilot hole first. I used a 3.5mm wood bit starting from the front of the door. Apply minor pressure as you begin to drill, as once the fascia of the door is breached it’s only foam and you’ll fly through that. You’ll then get resistance from the inside face of the door, which you’ll need to proceed very cautiously to prevent the door splintering/bursting in an unsightly manner. There will come a point where you’ll be able to see the drill bit poking through, so pull the bit out and come at it again from the inside face to complete the hole. Once you’re satisfied with the alignment of the hole, you can use the 12mm flat bit to slowly bore through the door. Take your time, and once finished give it a quick file down and then you can safely fit the Ring Door View camera. The whole process, even being very cautious, will take under 10 minutes.

Good quality and speedy delivery

Didn't cut as well as expected. It almost seemed blunt.

C'est du produit Bosch, donc fiable et précis. Parfait.

Perfetta come da descrizione

MAGNIFICO. DE MUY BUENA CALIDAD Y PERFECTAMENTE EMBALADO. CORRESPONDE CON LO ANUNCIADO.

Waren sehr zufrieden!😊

Círculos perfectos en madera.