BJSIA HDTempered Glass Screen Protector Compatible with 19-22 Nissan Altima Platinum/SL/SR/SV 8" Center Control Touch Screen Protector Car Navigation Car Accessories.

Great stuff. Easy to install and perfect fit for CRV 2024 Sports L.

I am super happy I decrided to make this purchase . It fits perfectly on my touch screen in my Honda crv . Makes the screen look sharp & clean . Came in protected and well taken care of .

I was hoping to find some sort of tempered glass protective for this giant screen in the Subarus . Found this one . It did come slightly chipped on the side but it was minuscule, But nothing too noticeable. Pressing the bubbles out was fairly easy . It’s a good product and worth a go . I have heard these protectors separate in the summer weather so only time will tell . The touch screen works flawlessly on the other hand .

Very easy to install. Let it sit in the sun a little bit after installing. Makes it easier to get all the bubbles out. Makes the screen look like new!

The protector appears to be of high quality, and the fitment was custom. There are three circles cut for two rotary dials and the hazards button, all of which were cut larger than the controls, and correctly oriented and spaced. (Hint : use the three cutouts as your index, NOT the corners.)The size of the protector is a little undersized, and it is quite obvious that there is a screen protector on top of the stock display........but that's because there is a screen protector on the stock display.Comparing the glare of my flashlight on the stock display vs the protector, I can see the protector does offer some amount of matte finish, which helps reduce the intensity of glare (from say the sun, overcast sky, headlights coming in the side of a vehicle, ect.)I was concerned about the application process, but if you follow the instructions on the back of the box, you should do fine. Here's some additional insights before applying the protector :-Use a dry microfiber cloth to SLOWLY wipe any dust off the screen-Use a paper towel and rubbing alcohol to SLOWLY AND SOFTLY wipe down the surface, allowing it to, over time (2 minutes?) break up any contaminants on the screen. Start going around in four inch circles, and then go top/bottom, finishing going left-right. (The human eyes focus on up-down scratches easier than left-right)-Begin the instructions on the back of the box.-When applying the protector, use any cut outs as your index. Point your finger through these holes, line up the tips of your fingers with the controls, and slowly lower the protector down toward the screen (but don't start sticking it yet)-Keeping the other corners off the screen, start at the top left corner and allow about the size of a postage stamp to stick. Confirm the angle and position of the protector, and sticking about 1 inch arcs at a time, slowly (maybe over the span of two minutes) lower small portions of the protector down, and press any air bubbles out as you go, instead of letting them collect up.-Once fully applied, thumb out any remaining air pockets. Once done, use the same dry microfiber cloth and clean the surface.Attached are pictures, installed, in a Subaru Outback 2020, 10.5" display. Note how the protector covers maybe 80% of the display, and how noticeable the raised edges are. Also see pictures of glare from a 600 lumen flashlight, and how the display color and fidelity are not affected by the additional layer of...glass? Plastic?

Excellent

Perfect fit, and made the somewhat matte screen appear clearer now.

Easy to install fits perfect great quality!