RIGID INDUSTRIES D-Series PRO Flood Beam, Pair, Universal, 2-Pack

Update: I returned the wrong ones and re ordered from a different seller. I received the correct ones and they are great, nothing bad to say about them. Super bright, great looking, easy to install/adjust, etc. they also pair great with an amber cover for rain/fog/snow. Changing to 5 stars for the product, I still wouldn’t recommend the previous seller so be careful. I’m sure the lights are great, unfortunately I was sent the wrong ones however. Just beware if you order these they may send the wrong light. They are legit rigids(not knockoffs) and the shipping was quick, but I didn’t get what I ordered. If you order these don’t rely on using them right when you get them in case they send the wrong ones. 1 star…

I installed these on my JK, they work great. I am planning to buy another set for my Tundra. All around very well made & they are bright.

You can't go wrong with Rigid lights. I initially tried a less expensive pair of Philips pod lights but it turned out they created substantial RFI (radio frequency interference) so that was a deal breaker considering I have a ham radio in my jeep. Disrupted FM as well. The Rigid lights are RFI free and very bright. Spend the extra money, you won't be disappointed.

Great product. Shipping only took one day. Great experience!!!!!!!

Installed a pair of these floods on the cowling --the bottom of the A pillar -- on a 4WD van used for overlanding. We aimed them approximately 45-degrees from straight ahead towards the roadsides. We want ditch lights because the vehicle's stock lights do a fair job of illuminating what is directly ahead, but, naturally and by design, don't show us what's off to the side. In their first real trial, we drove on rural road with no streetlights and no traffic for 30+ minutes with these on and, at least to the sides of the vehicle, it was almost like driving in daylight. We did not want a million lumens for ditch lights, and with four LEDs pumping out a claimed 3,168 raw lumens per pair or 1,584 each lamp, these are perfect for our intended purpose. The build construction seems fine -- Rigid claims IP68 sealing -- but time will tell if they stand up to the elements. Each lamp draws 2.14 amps, and we installed the pair without a relay using a 10-amp switch designed to fit in a knock-out on our van's dashboard. The color temperature of these lamps is high, which means the light is very white. The stock incandescent headlights seem yellow by comparison. The color temperature is not bad or good -- it's just an observation of their output. The wiring harness is fine. The included switch is illuminated but as mentioned we didn't use it. We had to cut the harness to adapt it to our use. That's not a criticism of the harness as one size cannot fit all. Be prepared to break out your soldering iron and shrink-tube during installation. Cautiously optimistic about the longevity of these lamps. Will update this review if they fail prematurely.

I hesitated on pulling the trigger on these to put on my side by side. Especially since there's identical off brand ones for a fraction of the price. But let me be the first to tell you that these lights are well worth the money. You pull them out of the box and they just feel indestructible sitting in your hand. Extremely tough and very well made. They come with everything you need to wire them in. And once they are and you turn them bad boys on you'll be blown away. These pods are brighter than full length bars that friends have on their side by sides. I got the flood pattern and have them turned outward at about a 45 degree angle and there's still no gap in the middle. I am 100% satisfied with these lights and am now a Rigid fan for life!

So I bought 4 of these to put in my new bumpers that have space for them, they come with all the hardware and wiring harness needed to connect them to an independent switch, great and feels well made. I ended up splicing them into my reverse lights on the back and I purchased an adaptor to connect them into my factory fog light hookups. Works great. Now the problems come with how to mount them, the bracket creates a sizeable gap that did not allow them to fit into my bumper cutouts and the logo was going to be upside down, so I bought these rigid brand brackets that turn it right side up but they still would not fit in my bumpers. So I ended up having to cut the original bracket and running the bolt through a gap in the bracket with a washer in order to close that distance and make it fit in my bumper, also had to take all the bolts out of the faceplate to turn the emblem around to make it readable (voids warranty btw but I hated it being upside down), so after turning a 30 min install to a 2 hour install and having to cut brackets to make it fit, I love it. If the brackets were more adjustable would definitely be a 10/10 satisfaction

Very bright work excellent

Fácil instalación, buena cobertura de luz, adecuada para lo que necesito. Se siente su calidad.

These are now mounted on the Heed engine guards of my R1200RT. They are nice solid feeling lights that are quite bright. I was impressed by the apparent build quality. Their on-line customer service has been quick and helpful. Absolutely buy them again!

Bought this and received it in a fair amount of time. Installed and worked great.

Installed them a few days ago and they are Definetly bright, great for in the bush when it’s still dark or getting dark and needing to load/unload or turn around!

Not exactly blown away at the brightness of these pods. The light is output is okay at best in my opinion. I have seen a set of Rigid d2 driving lights and they seem far more impressive in terms of light output. The build quality of these seems great so they do deserve props for that but they could use some extra power for the price you pay.