electrosmart 25m Quality 2 x 2.5mm Loud Speaker Cable - Multi-Strand 444 25 Amp (2x 222 Strand) - Outside Dimensions of Cable: 7.5mm x 3.6mm

This speaker wire delivers excellent sound to my speakers, the low resistance (thank to the multiple strands) means the overall impedance is not increased by any significant amount.As for the length 25m of cable is a great amount. I've connect 2 front speakers (bi-wired), they aren't too far from the receiver but I still have loads of cable left.One slightly awkward thing is that with this many strands it can be difficult to neatly connect the cable to your terminals (depending on how they're laid out). So it could be worth getting some banana plugs to save hassle.

Excellent quality cables. I was not expecting it to be this good. Cable is quite thick and colour coded as well. Please note that strands are copper coated aluminum and not copper. I'm not too bothered about resistance as I will be using them for short distance, less than 15 feet.For the price it's worth every penny.

Great Value. Connects in to speaker terminals without problems but beware if your amplifier has small slots for the cable you will struggle. The copper in here is full 2.5mm diameter.I used this to wire surround speakers for a home cinema - with cables under floor etc achieved during a renovation.Similar hi quality cable eg. from QED has same outer (insulation) profile but only 1mm dia cable (and about 3x cost).. I used that for final connection to the receiver.

Fantastic cable - large diameter which carries the sound really, really well! Absolutely astounded by the quality vs price considering you can spend £100s on cables - I would rather have these!

still going strong with high quality sound still coming through it. High quality cable that I never had a problem with.

HAVING READ THE REVIEWS FOR THIS CABLE I WAS DISAPPOINTED ON HOW THIN IT WAS / IS.IT'S NOT SUITABLE FOR MAIN CABLE FOR GOOD QUALITY HI-FI / AV SYSTEMS. THE 2x 2.5 MM ISN'T THE THICKNESS OF THE CABLE IT INCLUDES THE SHEAF THE CABLE IS ABOUT 1 MM THICK.ONLY SUITABLE FOR AUDIO EQUIPMENT WITH CHEAP SPRING CLIP CONNECTORS.YOU WOULD BE BETTER OFF WITH STANDARD MAINS ELECTRIC FLEX - IT'LL DO THE SAME JOB & IT'S SOLID COPPER. THIS SPEAKER CABLE ISN'T 100% OXYGEN COPPER IT SEEMS LIKE ALUMINIUM COVERED IN COPPER.CHEAP POOR QUALITY CABLE FIT FOR LIMITED PURPOSE .

Have looked into the topic of loudspeaker cable resistance and have come up with this.The important thing to remember is to make sure the cable resistance is much, much less than the DC resistance ( or impedance )of your loudspeakers, typically 8 ohm.The present day thinking is to make sure the cable resistance is no greater than 0.05ohm for a 3m length.For example, for this cable with a 2.5mm diameter core, you can use up to 7 metre of cableand you would be less than 0.05 ohm. If you pay any more for thicker cable you are wasting your money because you would not hear any difference between the two.Also twisting the bared copper cable around a terminal is also OK they are nearly always gold plated on even budget speakers such as Wharfedale 10.1 , you need not buy fancy plugs.Any talk of capacitance or reactance is irrelevant, do not be tempted to spend hundreds of pounds on super duper gold/platinum or any other exotic metal. Oxygen free copper is the best so long as it is thick enough.Regards, Ken Rhodes B. Met(Metallurgy).,Dip. Ed., B.Sc. ( Honours Degree in Physics ) 25m Quality Oxygen Free 2 x 1.5mm 130 Strand Loud Speaker Cable by electrosmart

A very good cable, a little bit difficult to insert due to it's thickness. However, the sound of my speaker has improved massively and lot more details can be heard. My friend had suggested to buy QED instead but when I had a look at their range I was put off by the different categories they had such entry level, mid level....etc, so I decided to give a chance to the little guy and I wasn't disappointed after all is just a cable why pay hundreds of pounds and all the complications that complicated names that comes with it?