32 oz kit (946 ml)

I bought a resin dried flower keyring from a lady on instagram the other day, and it suddenly made me want to try my hand at it myself. I'm quite crafty but had never even considered resin-making before - it is ever so overwhelming trying to find the type. There are ones for different depths of resin, and for different heat resistances... I had been looking at a cheaper brand, but as my end goal is to make coasters, it wouldn't have stood up to the temperature. I chose ArtResin even though it was more expensive than the other brands, because whilst it can't cope with heat from a saucepan if used as a trivet, it is supposed to be able to withstand a cup of coffee with no problem. I also knew that I needed a simple 1:1 ratio to limit any misteps on my part, and I liked that it was supposed to have some sort of quality that helps the bubbles fight to the surface. Not going to lie, my little test shapes have bubbles, but I'm 100% certain it is more to do with my technique; I'm getting better but practice makes perfect! I think investing in a propane torch will help, my gas lighter doesn't seem to be overly efficient. I bought gloves, a mask and goggles as recommended by other resin artists, but was surprised to find that 1) there's no way it's going to get anywhere near my eyes, 2) it doesn't irritate my skin if i get it on my fingers, and 3) I have the window cracked open but the smell really isn't that bad. People say the smell permeates the house, but I guess it doesn't with this brand. It's a big relief because I only have a tiny flat and I can't do it outdoors. It is expensive, I think it works out as £10 more than other brands but I would buy ArtResin again. You may not agree, but there's something professional and reassuring about this brand; I wasn't sure from others if I was buying the right one for my needs, whereas I knew I was with this product. I like that they have a website that gives advice and videos on youtube - and of course, the ability to withstand higher heat, 1:1 ratio and low fumes mean I would gladly pay a bit extra. I do have one gripe, or I suppose a suggestion to help newbies like me... You have to be careful not to accidentally swap the resin lid with the hardener lid, because apparently it will fuse shut. They are different colours to limit the confusion, but the inner seals are red in both bottles. I don't know if we are supposed to throw them out (I'm not going to because I don't want it leaking if it falls over), but yesterday when I was trying my hand at resin letters, I forgot to put the inner seal back on the hardener, and as I had just put down the seal on the resin, I was only 65% certain which was which. I think it was ok, but if the seals matched the lid colours, or had 'resin' or 'hardener' on it, I'd be 100% instead of worrying that I'm not going to be able to open the bottles today. I am very happy with my purchase, now all that is left is for me to carry on until I can manage clear resin so I can make my coasters :)

No toxic smell and easy to mix. Drys crystal clear but bubbles are an issue with this resin, so buy a blow torch or vacuum chamber for larger mixes. It does not dry as solid as marine grade resin, but then it’s no where near as harmful. It serves my needs perfectly at the moment but I would not use this for furniture making. We made a 10mm thick slab with both this resin and a marine grade resin and this had flex whilst the other had no give at all. Jewellery and little items, this is the one to go for. Larger pours, there are better alternatives.

What a fantastic product. Completely odorless, very easy to use. The finish on my canvas is stunning. It looks like glass. By far the best resin I have used to date.

High quality resin which is simple to mix in the correct ratios - not cheap, but it's food-grade and crystal clear when it is mixed properly.

Great product but a little pricey

I use this resin to build paintings with lots of depth layer by layer. If used correctly, it leaves a flawless clear finish. Tips for use: measure 1:1 ratio of resin and hardener; mix for at least 3 minutes, don't be lazy; always wear gloves and be in a well ventilated space; a brulee torch for popping bubbles is your friend. The manufacturers site has lots of information and tutorials for perfect use that, honestly, it's worth heeding to considering the cost.

I managed to make some beautiful pieces of resin craft for a project I was working on. The smell wasn’t as bad as similar products and it was an easy process for mixing the resin.

I like Art Resin because it’s low or no odour, easy to mix and decent working time. I use disposable gloves all the time and cream my working area every time otherwise the resin will set. I just wish there was a size and price point in between the 16oz bottles and the large container which is £100+

Great resin. I do mixed media resin art and this stuff is great. Works as described.

A melhor resina que experimentei até hoje!

Super résine. Jolie rendu. Un peu cher par rapport à d'autre produit mais non toxique contrairement aux autres. Simple d'utilisation. Si comme moi c'est votre première résine, faite de petite quantité. Sinon on en gâche. Merci aux vendeurs.

色々とエポキシ樹脂を試して失敗を重ねて迷いに迷い遂に辿り着いた私が理想とする最高のエポキシ樹脂が、このArtResinです。 安心・安全・安定のトリプルAです。 ネックは他製品より圧倒的に高価な点ですね・・・ Made in USAなので諸に為替の影響を受けてしまう商品なので購入時期にはお気をつけて下さい。

Es una resina excelente la verdad la compré el 8 de enero 2025 y apenas el catalizador se está poniendo amarillo pero cuando lo mezclo con la resina no se pone amarillo sigue siendo cristalina. La recomiendo es muy buen producto solo que el precio es alto para dos botellas de 500 ml la resina es cristalina.