Air Cleaner Intake Hose Tube for 2009 2010 2011 2012 2013 2014 2015 Honda Pilot 17228-RN0-A00

Ya está instalado todo muy bien

fit perfectly. good quality

Perfect fit for my 2012 Honda Pilot. Helpful hi ts I can suggest and replacing the hose which took 20 mins because I wanted to go slow. Order the engine air filter and replacement screws if you never removed or replaced them prior. Loosen the 4 screws on the air filter box and remove then and hose clamps. Loosen the small hose clamp around the metal tube (not sure of the name) and push it towards the back. Take a razor blade and lightly score the rubber hose but do it lightly and a few times to butterfly the rubber-off around it and then take off the hose clamp. Loosen the rest of the hose clamps Just go slow and the entire hose will come off. To install the new hose, loosen the screw hose clamps but not all the way so it does fall off. Pull off the back round hose clamp and out it on the metal tube. Hold the metal round tube and slow put the rubber hose onto it then clamp the round hose clamp and put it onto the rubber. Clamp it again and push the rubber hose further in but still hold the metal tube. Install the other left side of the hose closer to the engine first and tighten the hose clamp. Install the hose to the engine air filter cover, hand tighten the screws one at a time but don’t full tighten untill all screws are on and the cover sits evenly. Spray a little wd40 and then tighten the screws but don’t over tighten. Connect the connectors back and reinstall the air filter intake.

I recently bought the Air Cleaner Intake Hose Tube for my 2009 Honda Pilot and I'm very pleased with it. It fits perfectly and works just as intended. Highly recommended!

Easy to install but the tightening bands were unfortunately placed poorly; some of the screws were harder to get to than they were in the original part. It ends up with the screws being on the side or underneath the tube (when installed correctly) instead of on the top where they're easy to get to.