Air JadeGutter Guard 5", 48ft Micro Mesh Stainless Steel Gutter Needle and Leaf Filter, DIY and Modify for Universal Fit Any Roof or K-Style or Other Gutter System, 15 Pcs Gutter Guards, White

The extra expense for these is worth it. They are well constructed, easy to install, and seem to work great.My friend installed them at his place, and recommended them. I bought cheaper ones a few years back, and they failed miserably. I was afraid the fine particles off the roof shingles would go through the small holes. I poured a handful on the mesh, and it kept out all but the smallest parts, which the rain should push through. Very easy to install. Just push the backside under the shingles and put screws in on the gutter outside edge. The package allowed for 4 screws, but both my friend and I only used 2, which seemed sufficient. Last fall I had heart issues, so did not clean my rain gutters. What I found this spring, before the Air Jade Gutter Guard's were put in, was a mess. Much more leaves and such than I anticipated. Now I can forget about it, cause it's covered.

Installed on all the gutters around the house , After cleaning the gutters full on pine needles (For the Last Time Yeh!).A big set of waves of large rain storms with winds hits us for weeks just after I finished installing these gutter guards.They worked GREAT! Pine needles and tree crumbs just blew right off, went out with a umbrella during a storm , just had to know.See the picture how close he pines are to the house.Simple tools to install, I started it paint the edge of gutter to look nice when looking up at the gutter.Great product, Saved thousands based on the quotes received from hired a gutter company to do it.

I like this product but attaching several 3 ft sections does not give you a seamless line as shown in the pic. Still worth the money for me though.

I had to clean my gutters annually. I am now 70 and will never have to do that again. Instructions did not include metal roofs, but they go on like a shingle roof. I did have to remove the bottom screws on the metal roof to get them in place, not a problem with a battery drill. Great fit, looks great, and they supplied lots of extra screws and a magnetic chuck. ( 7mm).

Very good quality. All pieces were exactly the same length and width. The stiffener on the back side and mounting side rail are all nice and stiff. Makes it easy to slide under your shingles. Comes with a bag of self tapping hex head screws and a magnetic drill bit so you're not dropping screws all over the yard. Get yourself a strong pair of sheet metal snips if you are going to have to cut angles for dormers. You can do it with a hacksaw but snips will save time and make the job easier. Well worth the investment if you don't already have them.

I would give this 4.5 stars. Its a good value product. I just installed it last week, now I am waiting for some good rain to test it.The gutters are well made. though I would have preferred the holes to be a little more larger. The trim on the edge that goes under the shingles is a square shaped instead of a triangular or sharper edge to slide in. There is no overlap at the ends so the length may have a slight gap.It comes with 60 self tapping screws and an impact bit driver. You need a hacksaw to cut the extra lengths. I will really know how good it is after getting some rain as i have a feeling the holes may not be large enough to handle a heavy downpour.After installation it looks good.

As a building engineer I consider all options before giving good reviews on a product for a building structure. The design and quality of this filter/screen setup is much greater than I normally see in an Asian product. I am happy to give two thumbs up on these screens.I installed them on three gutter areas of my home. I cut the ends so there was an overlap at the seams, slid them up under the shingles and used pop rivets to secure them together. I also secured the overlap with a single pop rivet. At the inside corners I carefully cut the frame away and secured the overlapped screens together with pop rivets. It made for a very secure screen system. They came with nice screws, but I go beyond the normal.I feel this installation will last twenty plus years with out question, and I'll never need to clean the maple leaves and helicopters out of my stinky gutters. A big plus.

For years I have been battling pine needles. I have tried several different covers. Nothing has worked well thus far. These covers came packaged nicely and instructions were very common sense. I did the back first to see how they would perform. After the first storm, I checked and they went above and beyond my expectations. Captured all the water and none of the needles. Installed the front yesterday and a storm hit last night. All looks great! Highly recommend these to anyone with pine needles and any other leaves...