RP Remarkable Power, RK7547 Exhaust Flex Pipe 2.5" x 10" Heavy Duty Stainless Steel 14"OL

I am very satisfied with receiving this exhaust pipe flex unit. It was delivered to me in just a few days and fit perfectly for my application. I will use this seller again. Thank you.

This flex bag is well made and the ends are made of thicker pipe, making welding easier!

Good quality, welded right on to the Existing exhaust pipe.

My 2006 2.4L HHR had the dreaded hole in the flex-pipe, so I bought this to replace it. Initially, my plan was to cut off the old one (leaving about a 1.5" length of "stump" pipe) and clamp on this new one. I started out that way, but one problem with that is the size of the pipe (outer diameter 2.5") is too large to clamp onto the OEM pipe (outer diameter 2.25"). I ended up using an intermediate size (2.25" INNER diameter) pipe about 1.5 inches long and eventually slipped the new flex-pipe over that. I say eventually, because it required expanding the pipe on the flex-pipe piece with a pipe-expander (available to borrow at any Autozone, O'Reilly's, etc.) a bit to get it to fit. I had all that in place and had a 2.5" clamp to clamp it in place, but it wouldn't clamp tight enough to get it to feel "on there" let alone have it seal, so I eventually had to find someone to weld it for me. All good now.If I had to do it again and didn't know someone with a welder, I'd use an adapter section of pipe (available at Autozone, O'Reilly's) to size it down to the right size. That requires two clamps, of course, one for the big end and one for the smaller end. Even then, because of the short length of pipe we're dealing with, you'll first need to cut a bit of pipe from the new flex-pipe to make room. The pipe cutters are also available to borrow from Autozone, O'Reilly's, etc. There's maybe 2 inches of "play" in the OEM cat-back exhaust so that you don't have to be perfectly precise in length, but you do have to get the orientation right.The larger point--and the reason it doesn't get 5 stars is that this could have been so much easier if the manufacturer had just used the correct sized pipe.

They are still like new, amazing

I just put a new set of headers on the car and had a pre-bent exhaust system ready to go. I didn’t think about the frame connectors, already installed. A bit of fabrication and I was close. The flex joint gave me the clearance i needed

Fit perfect and half price of auto store

Product arrived in perfect condition and fit well. I.D. is just a hair over 2.5" so it slipped on very easily. Although the listing says the material is stainless I suspect this is only for the braided section. The extension pipe has minor rust on the inside and is also very magnetic leading me to believe it is a plain mild steel. Either way it will work for my application and looks like it will last for years to come.

Connection pieces are mild steel and easy to fot

Very impressed with fit and finish. Will order from this company again if I need exhaust parts. Price was very economical.

Was a perfect fit for my 2006 Dodge charger

Should fit great

Cut the old one out of my '13 F150 and installed this new one. This new one fits snugly over the exhaust pipes. Works like a charm. No welding required, just used 2 clamps.