Replace for Dewalt 20V USB Adapter Charger, DCB090 Battery Adapter with LED Work Light, DC Port & Dual USB Port, Power Source Charger for Dewalt 12V 14.4V 18V 20V Lithium-ion Battery

Works great. Hoping the color would be black.

Good for camping

The light works well. The problem is that for some reason it only charges the phone partway before stopping. It charged my mom's phone to 40% then stopped charging. She unplugged and replugged it and it charged to 88% before stopping, so she unplugged and re-plugged it again and it finally fully charged her phone. A similar thing happed to me with my phone when I tried it out the next day with the same Dewalt battery.

The 12 volt port (5.2mm) is useless. It shuts off after 12 seconds with a 35 mA load. This feature is useless, therefore it's junk. Replacement...

I selected this adapter to use with my TS100 soldering iron using the DC jack on the side. The DC jack works perfectly for this job and gives sufficient power to run the soldering iron. The addition of USB-A ports for charging phones and a light are extras for my purposes but you really can't go wrong at this price. As others have stated the adapter is yellow rather than black as it appears in the listing. I removed no stars for it but the only thing that would make this perfect would be the addition of a small cutout to allow the batteries locking clip to lock the adapter onto the battery.

Got this Jialipok Dewalt 20V USB Adapter Charger to turn my Dewalt batteries into portable power banks. This is decent quality, works fairly well, but has some common problems. USB charging is good, can go a little over the 2.1A per port rating while using both ports at once, but it has no power switch, so it's always draining the battery, and no low voltage cut-off so it can damage the battery, running it until it stops is NOT safe. The LED light is useful for small tasks or table lighting but also underwhelming. Casing is a medium weight ABS plastic which is a little less durable than batteries or power tools, could last a long time if handled with care, but it does not engage with the battery latch. The 12V port is 12V but I didn't use it (don't have a use for it).Overall, 4 stars is generous, it's a decent USB adapter, just remember to keep an eye on it, remove the battery when not in use, and if you forget it may damage your battery.

This product is actually an aftermarket version or replica of the Dewalt DCB090. However, in my testing, maybe it is even better than the original Dewalt one in terms of features and capabilities.* The original has the battery gauge. This one does not, but note that most of the replacement batteries do come with a battery gauge on the batteries themselves, so is it really necessary to have a duplicate one on this adapter?* The original one USB ports output appears to have a total output of 1.5A only. In my testing, this aftermarket product each port can support over 2A. I am successfully able to draw 2.4A on one port and 2A on another port at the same time, they both work at the same time and charge high-current demand devices.* This aftermarket product has an extra flashlight(please refer to my attached picture, it is more like a "flood light", which is good to illuminate a large area), and also an extra 12V DC5.5x2.1mm jack output. Where the original one do not have these two features.The "build quality", thickness of the plastic or sturdiness is NOT as strong as the original one. However, I consider the quality is still acceptable being as an aftermarket or general use.This product so far work as advertised. It is also pretty flushed with the battery after battery insertion.There are two complaints I have:#1. The "notch" is missing where it is used to "lock" the battery in-place, and you need to press the button on the battery to unlock the adapter/tool.#2. The USB and 12V DC jack output ports, they are "always-on". That means even you turn off the LED work light, if you plug something, it will continue to drain the battery. It is both good and bad. Good, it continues to work; Bad, the battery is being drained until it dies. There should be an individual button to control or turn on/off the output of USB/12V jack, then it will be much more desirable and customer don't need to unplug this product when it is not in-use.Overall, it's a good replica or aftermarket version of the official DCB090, with better USB output current, additional 12V output and an amazing LED flood/worklight, too bad it misses the battery lock notch. Or it will be a 5-star product.

Great little item for charging your phone on the job site with the battery you have handy from your DeWalt tools and a little light comes in handy once in a while as well everyone should have one it’s a nifty little item for all your tech stuff that needs charging