Kingroon PLA, Black PLA Filament 1.75 mm is for The 3D Printer, Filament Black PLA, 1KG Filament Dimensional Accuracy +/- 0.03 mm,3D Printer Filament PLA with Spool Wound Neatly, AA-1kg PLA black

The media could not be loaded. I have been wanting to try the silk filaments for a while, but never had a suitable project.This Kingroon tri colour filament comes in at a great price.The print quality is perfect. The red and blue can blend together to make a deep purple colour.The light reflects all of the colours and this gave me the idea to print some Christmas decorations.I removed the filament straight from the pack and into the filament drier, the hygrometer only registered 30% rH, perfect for PLA.I completed some filament calibrations prior to printing objects.No problems with bed adhesion, filament feeds without tangles.I have heard silk pla's can be difficult to print with bed and layer adhesion issues, but I have had none of these problems with the kingroon filament.Prints great with layer heights of 0.2 or 0.1mm.I have no reservations about recommending this filament.

I bought this primarily to make Lithophanes and it serves this purpose very well.The prints it produces are of good quality, and it's not a hard material to print with. It's very forgiving on temperatures and settings.Would make a good beginners filament because you can't really go wrong. Bargain priced too.

I went with Kingroon Tricolour Silk PLA in red, blue, and green for my Poly Xmas baby yoda and I must admit it is a visually stunning filament that adds a unique, vibrant finish to prints.The colour transitions are smooth and really bring designs to life, making it perfect for decorative or display pieces. There was no stringing it was very smooth print.Despite the high-speed printing, the filament performed exceptionally well without any issues. If you're planning on making Christmas decorations or any festive-themed prints, or even want a stand out bust this filament is a perfect choice.The glossy silk finish combined with the striking colors will definitely make your prints stand out. I Highly recommend.

The prints turn out well but I have issues with stringing.Prusa Mk3s. Default PETG settings in Prusaslicer left me with stringing.Prints are very good apart from the above issue. I have dialed temperatures down to 230 bed 85. From a temperature tower, will try 225.Prints on textured plate and remove easily.Recommended as value for money.

We have been using this filament for a while now and can honestly say we have not had a problem with any rolls, unlike the cardboard rolls from other manufacturers, bed adhesion is great, can handle Bambulab X1c print speeds and colours consistent on each order.

This has to be one of the worst filaments I have ever used.It arrived with a matt look too it. I measured it with calipers across a length and it never exceeded 1.68mm, it is undersized from the listing as a result and from the most standard diameter which it claimed to be, 1.75mm.I have been using the same ABS profile in prusa through a multitude of brands of ABS filament and have never had to change my settings and produced prints first time every time for the last two or so years. I questioned the quality of this as soon as I opened the bag, but when my first completed prints came out de-laminated, that confirmed it.I did my best to accommodate with a new profile using the correct 1.68mm dimensions but it still prints like junk, peels apart, over or under extrudes.It also chews up in the extruder, which based on my experience with this printer and my success, I can only put down to the material being weak. This isn't my step counts, my flow settings or anything else that have been absolutely fine with most of the other brands on Amazon, Sunlu, etc,The chewing in the extruder goes hand in hand with the matt appearance of the filament. It looks 'diluted', or like it has some filler within or something that isn't thermosplastic/ABS, which would also probably explain the de-lamination. I am very annoyed because my experience is worth a tonne, I don't just print junk like print in place toys, my printer runs a small business, and I can see junk filament when I use it.

This is the best PLA Ives used in a long time, and very cost effective! Thank you!

Great value, but each color prints VERY differently. Some are quite goopy/stringy/squish (blue, purple) so you have to really dial in the settings for each one which is a hassle. It was a good way to test out a bunch of prints, but overall not worth the stringy cleanup on the models and elephant foot inconsistency between rolls. Just using it for initial prototyping now, but never final products to sell or use.

Is ok but a bit of a grayish tone and doesn't flow the best, but it's would pretty good.

Runder roter Deckel öffnet sich dauernd

Everything was fine, the order arrived on time. It was needed for 3D printing.

Jederzeit gerne wieder

Das Filament ist sauber ohne Rotation gespult, sodass ein komplexes Modell ein farblich sehr gutes Ergebnis gebracht hat. Die Einschränkung ist jedoch, dass es sehr stark zu stringing neigt. Bei Seidenglanz Filament ist das ein Nachteil, da es aufgrund der Seidenoptik mechanisch nicht ohne Glanzverlust bearbeitbar ist.