014973153472 Nylon Drawer Guide, 3/4-Inch, Silver

Hard to find, yet plastic parts age with time and sometimes need replacements so drawers do not fall out of the cabinet when the drawer is pulled out. Measure your original fastener before ordering to make certain that this part will fit well. Hard to find, good part for repair, priced reasonable.

Wasn’t sure of size to get but these worked perfect. Glad I found them it repaired my draw from falling off track.

I live in an older home and this fixed my drawer perfectly.

This makes for the cheapest and easiest drawers I know of, they're OLD technology and work well, you just need a guide made of wood for the 3/4" slot to travel in. They will last for years and install in minutes.

It was exactly the size I needed, which was a relief because I had trouble finding the correct size. I thought it came with only one 1, but was pleasantly surprised that it came with 6, which also happen to be how much I needed. I’m satisfied. I superglued it to the back of the drawer first for proper placement and then secured it with a staple gun. Would buy again for future furniture flip projects.

I have been looking for these to repair some older (1960's?) furniture that had a few broken ones. There are so many that have larger openings for the rail to slide on, but these were the only ones I could find that looked correct.Fast forward to after replacing them...they work perfectly! And relatively inexpensive at that.They look to be sturdier than the originals, so I am hoping to keep the drawers working for years to come.

Apparently the 3/4" size slides are not common. I was able to locate a direct replacement here for the broken drawer glide, 3 screws and it was done. I noticed that there were 2 broken glides at the bottom of the cabinet (somebody else had replaced them before), and noted that the original installation used wood screws with a tapered head, which probably contributed to the cracking and failure at the screw holes. I used pan head sheet metal screws (which have a flat bearing surface) to attach the plastic part to the wood drawer - this should prevent the cracking at the screw holes. Original glides had tabs to position at the bottom of the drawer, new ones didn't, requiring a little finesse for the positioning.

Received a pack of 6. Worked perfectly for a 30 year old dresser with 3/4 inch wood tracks. Wish that it came with some screws. I had to purchase small enough screws to attached to drawers. Otherwise, they are perfect. So happy with them.