WOLFBOX 4A USB C Dash Cam Hardwire Kit 11.48ft Total, 24/7 Parking Monitor | For WOLFBOX 4A USB-C Dash Cams, Converting 12V-24V to 5V, Battery Drain Protection

I recently installed the WOLFBOX USB-C Hardwire Kit for my G900PRO dash cam, and I have to say, it was one of the easiest wiring setups I've ever done. As someone who isn't an expert when it comes to car electronics, I was initially a little hesitant, but this kit made the whole process so simple and straightforward.Clear Instructions and User-Friendly DesignThe WOLFBOX USB-C Hardwire Kit comes with clear, easy-to-follow instructions, which is always a relief when you’re dealing with car electronics. The kit is designed to work specifically with the G900PRO dash cam, and the compatibility is spot-on. All the cables and components are neatly labeled, and the connections are straightforward. I didn't have to do any guesswork or complex wiring, which made the process so much less intimidating.Simple Wiring ProcessOne of the best parts about this kit is how easy it was to hook everything up. The hardest part was deciding where to mount the hardwire box, but even that was made easy with included adhesive and a practical design that fits neatly in my car’s fuse box area. The actual wiring itself was incredibly simple—I just connected the hardwire kit to the car’s fuse box (it comes with a fuse tap) and then plugged the USB-C cable into my dash cam. The connections are secure and solid, with no loose ends or complicated steps.The cable length was perfect for my setup, allowing me to run it along the edges of my car's interior without too much extra slack or excess to hide. Once everything was connected, I was pleasantly surprised at how clean and professional the wiring looked.No Need for Professional InstallationI was worried I might need to hire a professional to install this, but honestly, it was so straightforward that I did it myself in under 30 minutes. The hardwiring kit eliminates the need for a bulky power adapter, which not only looks cleaner but also frees up my car’s USB ports for other uses.Reliable Power SupplyThe WOLFBOX USB-C Hardwire Kit works exactly as advertised, providing a reliable, continuous power supply to my G900PRO dash cam. The kit is designed to work with the vehicle’s ignition system, so it automatically powers up the camera when the car is started and shuts off when the car is turned off, protecting your car’s battery.Final ThoughtsOverall, I couldn’t be happier with how easy and seamless the installation of the WOLFBOX USB-C Hardwire Kit was for my G900PRO dash cam. The kit is well-designed, and the clear instructions made the whole process super straightforward. If you're looking for a way to hardwire your dash cam without the hassle of complicated installations, this kit is the way to go. It's an essential upgrade for anyone who wants a clean and professional setup with minimal effort. Highly recommend!

I loved the connectors. If I could have done 100% through the fuse box, I would have been so happy. I installed on a Toyota FJ Cruiser. The kit seemed easy enough to install until I started looking for a constant positive and convenient ground. I ended up tapping into my car stereo integration. The camera stays on while the car is parked and works as expected. Quality seems middle of the road and will likely not cause any problems down the line.

The WOLFBOX USB-C Hardwire Kit is highly compatible with the VIOFO A119 Mini 2 Dash Cam, providing a battery-friendly and tidy power solution. Its design makes installation a breeze while prioritizing vehicle battery health.PerformanceThe kit delivers consistent 5V/2A output, perfectly suited for the VIOFO A119 Mini 2. It powers the dash cam reliably when the car is on, and the ability to skip the red wire connection ensures no unnecessary battery drain.Installation TipsYellow Wire: Connect to a fuse that activates only with the ignition (e.g., accessory or cigarette lighter fuse, 15A-25A). Verify with a voltage tester that the fuse powers off when the engine is off.Red Wire: Leave disconnected for a battery-safe setup, eliminating constant power draw.Ground Wire: Attach securely to a metal part of the vehicle, like a screw near the fuse box.Parking Mode: Avoid the hard-wire parking mode to prevent potential battery drain over time.RecommendationThe WOLFBOX USB-C Hardwire Kit shines with its compatibility and smart design, letting you use just the yellow wire to keep your battery safe. It’s a reliable, easy-to-install solution for the VIOFO A119 Mini 2, making it perfect for a professional dash cam setup without worrying about battery life. Highly recommended!

To do a permanent install you need a power cable and--with most newer vehicles--some kind of fuse tap to get power off your fuse block. This kit includes a generous length of wire, multiple fuse taps (for different sizes), a handy tool to pry trim or push wires behind it and my favorite part, a little box that will automatically shut off power to the camera if the battery voltage drops below a certain amount.This feature is a necessity if you intend to wire the camera to use the parking monitor feature which requires a constant 12V source. To prevent the battery from being drained while the vehicle is parked, this little device monitors the battery voltage and, when it gets low, stops the camera from drawing any additional current until the voltage goes back up.The quality of the parts is good--as I have experienced from other Wolfbox equipment I have bought. This is a good purchase in that I didn't have to make up any cables of my own nor did I have to find fuse taps, etc. My cam is installed permanently and cleanly thanks to this kit.

Ordered second one for second install. First install was great on the Palisade. EASY. Second I received was opened and the orange tuck tool was missing. Good thing the dash cam includes the same orange tuck tool. Otherwise I would give it a 5 star.

When just plugging it in seems too easy--how hard could it be to route a couple wires under your dash?The kit includes everything you need to do a "Permanent Wiring" install for your Wolfbox dashcam (G930). You only need to identify two fuses in the cabin fuse block--one always hot, the other switched. (It's also nice to know what they control--for example, my Ranger had several "spare" fuses that make it slightly easier.)Next you get to figure out how to route the wires. Since I installed it in the dash tray I had to run the wires to the middle of the dash (rear camera too). It only seemed impossible. A few hours later and it was all good. The nice thing is the kit includes generously long leads (I thought they were too long at first) so I was able to find a way.Once it was all in place it fired right up as soon as I plugged in the camera.Guessing the little box in the middle has something to do with sensing the battery voltage and preventing running it too low, and thinking this is probably the only part of this kit that might ever experience a problem. Still, I always unplug the camera when I park in the garage, just in case.

In general, this is a great product and easily the best way to power and use your dash camera.Installation & Setup LogisticsInstallation is not particularly easy, mainly when it comes to identifying the correct fuses to tap into. To be clear, this isn't a fault of the kit itself, but it does require some extra research and logistics on your end to figure out your specific vehicle's fuse box layout before you start. Note that after installation, the fuse box cover doesn't fit anymore.FunctionalityOnce installed, the functionality is excellent. The camera doesn't have to remain on all the time; you can wire the kit so that the camera automatically turns on and off directly as you start and stop the car.Pros & ConsPros: Hands-down the best way to run the camera; enables convenient automatic power-on/off with your car's ignition. (or constantly on if you prefer)Cons: Requires vehicle-specific research and testing to find the right fuses during installation.

Hardwire install for 24hr parking mode . Bestbuy installed for all wiring purposes & to hide wiring.

Ottimo

自分で接続をしました。無知なのが原因かもしれませんが、説明書通り赤をアクセサリー、黄色を常時電源につなぎました。そうすると　キーを回していないのにWolfBoxがたちあがってしまったので、悩んだあげく反対につなぎました。すると一見正常に起動するようになったんですが、駐車監視モードがうごいてるようにおもえません。（設定でオンにしてます）何かアドバイスがあればお願いします。

This hardwire kit is excellent and feels very solid. The cable length is sufficient, but I ran into three issues:1. There’s a small control box (possibly for a chip) positioned along the cable, and it ends up too short on one side. The black part of the cable is shorter than expected, which made placement tricky. It would be much better if this box were closer to one end, so it could sit neatly near the fuse box during installation.2. The instruction booklet doesn’t clearly explain why two fuse connections are required—one that’s always powered and one that’s only powered when the car is on. After some trial and error, I realized the ACC cable isn’t meant to power the camera directly. Instead, it signals to the camera when the car starts, allowing it to exit parking mode and begin recording. This confused me at first, and I thought something was wrong with the kit. Be sure to connect both fuse wires or the system won’t function properly.3. I also wish the instructions had included recommendations for which fuses to tap. In my 2020 Toyota C-HR, I used the cigarette lighter fuse for ACC (only on when the car is running) and the dome light fuse for constant power.Hope this helps someone!

Boa qualidade. Funciona

Gute Qualität, gute Verarbeitung. Ich habe es für meinen Schwager bestellt, und er ist von diesem Produkt begeistert.Sehr empfehlenswert. TOP