Motion Sensor Led Light Strip - Under Cabinet Lighting with Power Adapter, 6 Adjustable Brightness and Timing, Light Strips for Kitchen Cabinets, Stair, Showcase, Bedroom, 16.4ft 6000K ColdWhite

I’ve been using these about a month and I’m very happy with them. The install was very easy and it looks very sophisticated. I placed a string completely around the bottom of each rectangular (front, back, and both sides) using one string for each cabinet so I didn’t need to buy extra connectors or corners. Purchasing extra corners/connectors as one reviewer suggested wasn’t need. The string of lights is continuous. The directions show you how to go around the corners. The taped side was more than adequate to hold the lights. I did use heavy duty Velcro to attach the remote/motion sensor to the underside. I wanted access to the remote/switch so I could easily change settings if necessary. My cabinets have a bottom lip (not flush to cabinet face) so the lights and remote are not visible. Very nice and professional looking.I have cabinets on both sides of the range with microwave above range. There is a plug in the cabinet above the microwave. I drilled a few small holes; one in the bottom of cabinet where the lights are installed and another inside the back corner of the cabinet to plug. Easy Peasy. No hard wiring needed. My entire backsplash is tiled and I wasn’t going down the “hard wired” road. The cabinet on the other side sits next to the fridge so I simply drilled one hole through the bottom side of the cabinet (no need to go up through the cabinet) and plugged it in to the refrigerator plug.The only complaint, or improvement they should make has to do with the remote. I wanted motion detection all the time. If you don’t click the “M” on the remote TWICE it appears the motion detector doesn’t work. If you don’t click the “M” twice it won’t work during the day. That little piece of info (and very important if your installing/checking the lights) is buried in their instructions. It’s not with (in the section/paragraph) of the “how to use” the remote/switch/setting information. Like most people I skip “warning” info, and the blah blah stuff. Messing with that setting took longer than installing the friggin thing.

Easy to install.

Applied the strip inside a jewelry display case. Had to make several 90-degree bends which were tough not being able to fold the tape. The adhesive was good enough, only time will tell. The white lights are very bright and enhances the products inside the case. The motion sensor was difficult to program following the directions, but once completed works very well as individuals enter the room (within about 10'). Used all but about 4" of the tape and was nervous about where to cut as directions should have made this clearer. Overall great product, well boxed, quick shipment, and very pleased with the final outcome.

These lights are great! I have had them for a few months and they are still working perfectly. I used them in my pantry and laundry room and they work like a charm. No problems with the adhesive either on the wall or under cabinetry and the sensors work like they are supposed to. Would definitely recommend. My only complaint is that I wish there was more cord between the lights and the sensor. It would make it much easier to place the sensor properly without having to worry about pulling on the light strip.

I wanted to wait a year before I submitted a review. It is exactly wonderful. It gives my stairwell the light it needs. And it works perfectly with no issues. I will buying some more for a backup and for gifts.

We wanted some under cabinet lighting in our kitchen, but didn't really know what to get. We got some cheap battery powered motion lights but those died too quickly, and I didn't want something that needed voice or hands to turn on.Finally occurred to me that LED strip lighting might be the way to go, so after looking at several similar products both on Amazon and in stores, opted for these lights. The were super easy to install, however we didn't cut them or chain strings together or anything because we had no need to do so.I did have to buy some additional adhesive to hang them up the way we wanted, but now we have tons of those for replacing or moving lights if/as needed.That absolute only issue we've had since putting these up, is only an issue because I haven't bothered to figure out how to set it properly, is the motion sensing. The lights come on pretty frequently even when you wouldn't think they should - however since they're LED it's not going to break the bank when there are only 2 adults in our house. If you had pets or kids running around you'd really want to make sure you get the sensitivity set correctly but it's just not a priority for us right now.All in all this was a great purchase and was very inexpensive.

Purchased this early 2024 for a hall closet. Nice bright light, fairly easy to install and set up. Unfortunately the sensor stopped functioning and we can only turn it on manually. Past the return window, so I will need to replace it with another model 😒

I used these for under cabinet lighting in my kitchen. I cleaned the surfaces very well but the lights did not stick at all. I had to use packing tape to secure them, not ideal but it works. Also NOT happy the motion sensor doesn’t recognize when there other lighting on in the room.