Keyless Entry Remote Control Key Fob Replacement Fits for Chevy Cruze Equinox Camaro Impala Malibu Sonic Buick Regal Verano Encore Allure Lacrosse GMC Terrain 2010-2021 OHT01060512 13504200

Para un Chevrolet Sonic 2013 funcionó perfecto todos los botones y compatible

This was a nice product and easy to program too. Cost 65.00 to cut worked with no problem.

Works as intended. All buttons work. Easy programming. I drove with my old key like normal, then when I got home I inserted the cutkey fob and it just works.

This is a replacement for the 1st fob I ordered, which I returned due to the "Lock" button being permanently pressed in when I received it (obviously a used/returned item). Amazon did replace it with one that seems to be new/unopened. After testing all the buttons, the "Lock" button does not seem to have the same audible "click" like the other buttons when pressing it, which seems to be a defect in the manufacturing process. However, I need a spare key, so instead of returning it, I took my original key from my broken fob and swapped it to the new keyfob. Programming was very simple...use a working key & fob (do not start the engine), turn the key until lights on dash come on and then go off by itself , then remove the key/fob, and within 5 seconds, insert the new, unprogrammed keyfob, turn the key until the dash lights come on then go off. Then, start the engine, I let my engine run for about a minute or so. The new fob should now be programmed to work the trunk and doors. If you do it this way, there is no need to have a new key lasercut. Note: when placing your old lasercut key into the new fob, you may have to spin the laser cut key counterclockwise once to put tension on the spring, then carefully close up the fob. This will insure that your key will "snap out" from the fob correctly. I used all the "key" parts from my old fob for proper fitment. You tube videos are helpful too.

Works good for a extra fob

I brought this to see if it would work on my car and when I got it I went to the dealership and it only cost me 25 dollars to get it cut for my car so it got programed by using my original key to start the car first then take out the original key and put in the key cut key and it locks and unlocks and pops the trunk so I would recommend it to anyone who has a chevrolet camaro car that only has 4 buttons for the car!

My original fob had its button covers cracked off around the icon, so I had to replace the fob before I lost interior parts and couldn't push the buttons anymore. I swapped the key blade out so I wouldn't need to cut a new one, but the parts weren't quite exact. Had to do a little sanding, add spot of glue, to make it work.Sometimes it takes several clicks before my car will react. I don't know why. It *works* eventually but it's really inferior to my original fob, which my car would receive signal from immediately and reliably from quite a long range. The difference is very noticeable. I'm afraid that if the battery ever dies on the fob, it will take a while to notice because it'll just seem like the unreliable signal is being extra bad, instead.

Excelente