HOMELYLIFE 3 Pin LED Strip Connector Solderless 10 Pcs with 16.4ft Extension Cable 3 Conductor for Waterproof or Non-Waterproof 10mm Wide WS2811 WS2812 WS2812B LED Strip Lights

The HOMELYLIFE 3 Pin LED Strip Connector Solderless set with an extension cable is a practical choice for integrating LED lighting into your entertainment build. Its ease of use, compatibility with 3-pin LED strips, and the flexibility provided by the extension cable make it a valuable addition to creating a visually appealing and customized lighting setup. Whether you're enhancing the ambiance around your TV, accentuating shelves, or creating dynamic lighting effects, these connectors and extension cables offer convenience and reliability for your entertainment space.

As an enthusiast of LED lighting projects, I recently had the pleasure of using the HOMELYLIFE 4 Pin LED Strip Connectors for a DIY lighting installation. After thoroughly testing these connectors, I am excited to share my thoughts and experiences with fellow enthusiasts.The HOMELYLIFE 4 Pin LED Strip Connectors are designed to simplify the installation process for LED strip lights, and they certainly deliver on that promise. With a solderless design, they eliminate the need for intricate soldering work, making the setup process quick, easy, and hassle-free. This feature is especially valuable for beginners and DIY enthusiasts who may not have experience with soldering equipment.One of the standout features of these connectors is their robust construction and secure connection. The connectors feature a sturdy plastic housing that securely holds the LED strip in place, preventing accidental disconnections or interruptions in the lighting display. Additionally, the four-pin design ensures a reliable electrical connection, minimizing the risk of voltage drops or signal loss.

They are fairly easy to use. Only difficulty was lining up the prongs to the pads on the strips. I’m putting 5 amps through them and their working fine

I purchased these connectors for my 6 pin LED strip lighting and they worked like a champ!! I’m very proficient at soldering but I could not imagine stripping six 22 awg wire fluxing and tinning each one, doing the same for the six pads on the LED strip and soldering each one individually in tight spots….heck no! I gave these a shot and it helped out immensely!!!One side of the connector is for the wiring and there’s six barrels for the six wires. You stuff the wires in the barrel until they’re bottomed out and you push down and the teeth inside prices the wiring and two side notches on the connector body locks it down. For the LED side there are teeth that bite into the copper pads so it’s a little bit trickier.I started by cutting my LED strip copper pads down the middle as well as you can. Some of my cuts were off and I had a little bit of pad to work with but I still made it work. The key is to line it up on the pads as best as you can, put a little pressure on the top portion of the connector so that the teeth can make a slight imprint on the pads without clamping it shut. This allows you to adjust where your teeth fall on the pads without completely close the top half. Once you are satisfied with your position, clamp it down gently with some pliers and you should be good to go. I had 10 connectors and I did all 10 without any rework.I strung out 32 feet of LED with these connectors and I have no issues. Now if one accidentally closes on you (happened to me) or if you have to rework one, I used the small screwdriver included in the kit and pressed in the locking features on the side as best as I could and used the little screwdriver to pry the connector open. Highly recommend!

I got these because I got my kids led stood for their rooms and needed to relocate the controller so it could power the lights. It comes with all the necessary hardware(though I wish it included more wiring) to extend the strip wand relocate the controller close to the floor. Definitely will consider buying again if I need to do similar for other projects.

After struggling with these connectors for hours, I have decided to do solder connections, which will be very difficult on such small contacts. Disappointing purchase. Would not recommend. Even if you can get them to work, it takes multiple attempts, and the connection is iffy at best.UPDATE 1/4/23: Was given a full refund by the seller, without having to ask, for the reasons described above. For this reason, I raised the review from 1 for product to 5 for service for average of 3 overall.

As someone who loves to decorate their home with LED lighting, I'm always on the lookout for products that make the process easier. And let me tell you, the HOMELYLIFE LED Strip Connectors did not disappoint! These connectors are a game changer - no more struggling with soldering or trying to get wires to connect properly. The connectors are easy to use and work perfectly with my 4-pin LED strips. Plus, the 16.4ft extension cable gives me plenty of flexibility to create the lighting design I want. Installation was a breeze, and I had all 10 connectors set up in no time. Now my home is filled with beautiful and colorful LED lighting, all thanks to these amazing connectors. If you're looking for an easy and hassle-free way to connect your LED strips, look no further than HOMELYLIFE LED Strip Connectors. They're a real lifesaver! 5 out of 5, would light up again.

I used these for my first ever LED lighting project, and it turns out connecting the wires and strips was actually the easiest part of the whole thing. Getting the protective peel off the adhesive on the LED strips... that's a different story. Seriously, though, these were super easy to use. My only advice if you're using aluminum channel with your strip lights is to make sure it's wide enough. These connectors didn't quite fit, but that ended up not being a problem for my set up. I could see it being an issue for someone else, though, and these are just slightly too wide for a 12mm wide channel.

Muy sencillo de usar