steel Driver Side Dead Pedal Left Side Foot Rest Kick Panel Compatible with 2018-2024 Wrangler JL & Gladiator JT

Finally got it in place, first nut on them second but would not go on. Finally got some traction on it and boom, holding tight. The foot pedal itself is nice. Not taking it out, ever.

I know its a foot rest, but the quality/fit/finish of this is not great. The crinkle finish powder coat is partially cooked and glossy the remaining spots are flat black that didnt finish the cook/cure powder times. There were also bare metal spots on the corners and in the seams not coated.The bracket used to sandwich the oem brace in the jeep was made okay, but the welded bolts they used are cheap and are prone to thread damage and stripping when installing the foot pedal and hardware.You literally have to lay upside down and out the door (if your lifted, I had to lay my rear end on top of a step ladder and board to lay horizontal) once inside under the dash it takes two hands to get the bolts and brackets to line up. Then with your other two hands and arms, slide on the washers and nuts, grab the ratchet and tighten….it’s tedious- but wait theres more…Once you get it installed, you’re going to realize the pedal is to close to the firewall and you have to disassemble and do it all over again. Unless you have a 2 y/o who can sit in footwell, or have a “little person” mechanic, this task is terrible.So once you take it off and adjust the pedal to the next setting or middle slot, you’ll realize it makes the install even hard as you can see or access the rear bolt to tighten.I am so tired of trying to get the thing installing to fit my setup, that know that it is in, I refuse to remove it for a return. It’s literally not worth the effort for $16 bucks.I’m 5’10 with a 32 inseam and the middle setting seems to be a tad bit back to far. The closest setting has your knee in the steering wheel and the furthest will require you to wear platform soled shoes if your a shorty like me.Best of Luck if you buy.

The holes in the jeep panel for the bracket mount do not exist on my 2024 2 door wrangler. Can’t be installed. Looks sturdy though.

Mine was missing the countersinking for the three hole options for the flathead bolt that holds the pedal to the fixed bracket. I have access to a machine shop, so I corrected the problem, but if you don't - let that guide your buying decision. The pedal won't fit in place at all without that countersinking, so it's not a small problem.Only reason it doesn't get one star is that for the sale price I paid ($16) it seems sturdy enough to take the chancePS: the smaller threaded studs that sandwich the pieces to the existing Jeep bracket are M6 x 1.0. You'll need to know this after you drop the nuts and washers behind the lower plastic kickplate, never to be seen again. Also, the threads seem soft, don't go crazy with the torque. Things you should expect for such low prices.

Change product not comfortable with my foot.

Mine was well finished and sturdy. But the installation is something else. Need to be creative here, cause would need a third hand, ideally The Thing from Adam familly... wich I replaced with a small clamp(could use a small Wisegrip too). My pedal position was in the middle, wich leave very little space to fix the rear bracket and screw the nut. Then when all set, had to srew at 1/8" at a time cause the lack of space (forget the ratchet). A trick would be to cut an old 10mm combo wrench to use the angle closed part. So patience here, cause I really like the result, and the pedal is just the right size not to be obstrusive but comfortable, wich was the missing point on long ride or for the occasional back up maneuver.