Beduan PU Transmission Round Belt 8mm OD High-Performance Urethane Belting Green for Conveyor Bonding Machine Dryer 10 Ft

very good product thanku

The media could not be loaded.  This belt is oversized for the pulleys on my 9x20 lathe but let me tell you, I put a 6” 3 jaw chuck on the lathe and it works great! No squealing, I can do all operations including threading. Very easy to splice together, I use a heat gun and it’s strong. I have a more powerful lathe with less money than the original belt. Can’t wait to use it on a tool post grinder.

Used online instructions to fabricate my own sewing machine belts for an industrial machine. This material behaved well and welded easily using a hot air wand for electronic circuit installation. I set wand to 410 Centigrade and when it looked shiny it was melted. I used V shaped metal to align and belt came out great. Surface is 'roughened' and grips in pulleys well.

I used this a simple motor bet and it worked out really well for that. I did as the directions show and melted the ends and stuck them together, the first couple of tries it didn't hold so I changed over and used my soldier gun and touched both side to the heat at the same time then stuck them together and presto! It is a good bond and has some stretchy. I would recommend this product but cannot speak to the longevity to it.

I got lucky when I found this. I have a number of antique player-pianos and arcade machines. One of the pianos has a belt that drives the roll, and it was just getting worn out from many years of use. It is made out of thick, round leather and I was having no success looking for a replacement. The closest thing seems to be leather belt meant for Singer sewing machines, but this is a fair amount too thin. This stuff is amazing. You just cut it to length, melt both ends with a lighter and push them together until they harden. I was Leary at first that it would hold up, but it is unbelievably strong. At first, I cut it just a little too long, but it was so easy to cut about a half an inch off and reattach it. I'm sure this will be useful for other things later. It's available in different thicknesses and also either smooth or rough. The rough style seems to be perfect for this application, so it won't slip when in use.

I like it’s lack of stretch. I will be using it on a valve grinder.